B37941K5104K070 EPCOS Inc, B37941K5104K070 Datasheet - Page 23

• Manufacturer Part Number: B37941K5104K070
• Description: CAP CERM .10UF 50V X7R 10% 0805
• Manufacturer: EPCOS Inc
• Series: B37941Kr

Specifications of B37941K5104K070

• Capacitance: 0.1µF
• Voltage - Rated: 50V
• Tolerance: ±10%
• Temperature Coefficient: X7R
• Mounting Type: Surface Mount, MLCC
• Operating Temperature: -55°C ~ 125°C
• Applications: Automotive
• Ratings: AEC-Q200
• Package / Case: 0805 (2012 Metric)
• Size / Dimension: 0.079" L x 0.049" W (2.00mm x 1.25mm)
• Thickness: 1.25mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Lead Spacing: -
• Other names: B37941K5104K 70; B37941K5104K70

Notes on the selection of ceramic capacitors
In the selection of ceramic capacitors, the following criteria must be considered:
1. Depending on the application, ceramic capacitors used to meet high quality requirements should
2. At the connection to the battery or power supply (e.g. clamp 15 or 30 in the automobile) and at
3. Ceramic capacitors with the temperature characteristics Z5U and Y5V do not satisfy the require-
4. For ESD protection, preference should be given to the use of multilayer varistors (MLV) (see the
5. An application-specific derating or continuous operating voltage must be considered in order to
The following should be considered in circuit board design
1. If technically feasible in the application, preference should be given to components having an
2. At least FR4 circuit board material should be used.
3. Geometrically optimal circuit boards should be used, ideally those that cannot be deformed.
4. Ceramic capacitors must always be placed a sufficient minimum distance from the edge of the
5. Ceramic capacitors should always be placed parallel to the possible bending axis of the circuit
6. No screw connections should be used to fix the board or to connect several boards. Compo-
Multilayer ceramic capacitors
Cautions and warnings
at least satisfy the specifications to AEC-Q200. They must meet quality requirements going
beyond this level in terms of ruggedness (e.g. mechanical, thermal or electrical) in the case of
critical circuit configurations and applications (e.g. in safety-relevant applications such as ABS
and airbag equipment or durable industrial goods).
positions with stranding potential, to reduce the probability of short circuits following a fracture,
two ceramic capacitors must be connected in series and/or a ceramic capacitor with integrated
series circuit should be used. The MLSC from EPCOS contains such a series circuit in a single
component.
ments to AEC-Q200 and are mechanically and electrically less rugged than C0G or X7R/X8R
ceramic capacitors. In applications that must satisfy high quality requirements, therefore, these
capacitors should not be used as discrete components (see the chapter “Effects on mechanical,
thermal and electrical stress”, point 1.4).
chapter “Effects on mechanical, thermal and electrical stress”, point 1.4).
cushion (unexpected) additional stresses (see the chapter “Reliability”).
optimal geometrical design.
circuit board. High bending forces may be exerted there when the panels are separated and dur-
ing further processing of the board (such as when incorporating it into a housing).
board.
nents should not be placed near screw holes. If screw connections are unavoidable, they must
be cushioned (for instance by rubber pads).
22
10/06