SR05.TCT Semtech, SR05.TCT Datasheet - Page 4

• Manufacturer Part Number: SR05.TCT
• Description: IC TVS ARRAY 2-LINE 5V SOT-143
• Manufacturer: Semtech
• Series: RailClamp®r

Specifications of SR05.TCT

• Voltage - Reverse Standoff (typ): 5V
• Voltage - Breakdown: 6V
• Power (watts): 500W
• Polarization: 2 Channel Array - Unidirectional
• Mounting Type: Surface Mount
• Package / Case: SOT-143, SOT-143B, TO-253AA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: SR05TR

Device Connection Options for Protection of Two
High-Speed Data Lines
The SR05 TVS is designed to protect two data lines
from transient over-voltages by clamping them to a
fixed reference. When the voltage on the protected
line exceeds the reference voltage (plus diode V
steering diodes are forward biased, conducting the
transient current away from the sensitive circuitry.
Data lines are connected at pins 2 and 3. The nega-
tive reference (REF1) is connected at pin 1. This pin
should be connected directly to a ground plane on the
board for best results. The path length is kept as short
as possible to minimize parasitic inductance.
The positive reference (REF2) is connected at pin 4.
The options for connecting the positive reference are
as follows:
1. To protect data lines and the power line, connect
2. The SR05 can be isolated from the power supply by
3. In applications where no positive supply reference
ESD Protection With RailClamps
RailClamps are optimized for ESD protection using the
rail-to-rail topology. Along with good board layout,
these devices virtually eliminate the disadvantages of
using discrete components to implement this topology.
Consider the situation shown in Figure 1 where dis-
crete diodes or diode arrays are configured for rail-to-
rail protection on a high speed line. During positive
duration ESD events, the top diode will be forward
biased when the voltage on the protected line exceeds
the reference voltage plus the V
PROTECTION PRODUCTS
Applications Information
2005 Semtech Corp.
pin 4 directly to the positive supply rail (V
configuration the data lines are referenced to the
supply voltage. The internal TVS diode prevents
over-voltage on the supply rail.
adding a series resistor between pin 4 and V
value of 10k
and steering diodes remain biased, providing the
advantage of lower capacitance.
is available, or complete supply isolation is desired,
the internal TVS may be used as the reference. In
this case, pin 4 is not connected. The steering
diodes will begin to conduct when the voltage on
the protected line exceeds the working voltage of
the TVS (plus one diode drop).
is recommended. The internal TVS
F
drop of the diode.
CC
). In this
F
CC
) the
. A
4
Data Line and Power Supply Protection Using Vcc as
reference
Data Line Protection with Bias and Power Supply
Isolation Resistor
Data Line Protection Using Internal TVS Diode as
Reference
www.semtech.com
SR05