CTZ3E-10B-W1-PF AVX Corporation, CTZ3E-10B-W1-PF Datasheet - Page 3

• Manufacturer Part Number: CTZ3E-10B-W1-PF
• Description: CAP TRIM 1.5-10PF TOP ADJUST SMD
• Manufacturer: AVX Corporation
• Series: CTZ, Kyocerar

Specifications of CTZ3E-10B-W1-PF

• Adjustment Type: Top Adjustment
• Capacitance Range: 1.5 ~ 10pF
• Voltage - Rated: 25V
• Size / Dimension: Rectangular - 0.177" L x 0.126" W (4.50mm x 3.20mm)
• Height: 0.071" (1.80mm)
• Mounting Type: Surface Mount
• Features: Low Profile
• Package / Case: 0.177" L x 0.126" W x 0.071" H (4.50mm x 3.20mm x 1.80mm)
• Capacitance Tolerance: +100, -0%
• Voltage Rating: 25VDC
• Capacitor Dielectric Type: Ceramic
• Capacitor Mounting: SMD
• Application: For AV equipment, cellular phone, cordless phone, TCXO, keyless entry
• Brand/series: CTZ3 Series
• Capacitance: 10 pF
• Case Type: Reflow Washable
• Insulation Resistance: 10000 Megohms
• Insulation Resistance, Test Condition: (Min.)
• Lead Specification: Lead Forming Type (CTZ3 Type)
• Package Type: Direction Taping
• Pin Head Type: Plus Slot
• Temperature Coefficient: N400 ±500 ppm⁄°C
• Temperature, Operating, Maximum: 85 °C
• Temperature, Operating, Minimum: -40 °C
• Torque: 10 to 150 gcm
• Voltage, Rating: 25 VDC
• Maximum Height: 1.8 mm
• Operating Temperature Range: -25°C To +85°C
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 478-4701-02; CTZ3E-10B-W1-PF

PCB Mounting
• When our recommended landpattern is not used, please check
• When mounting on PCB, please do not apply pressure to trimmer
Soldering
• When using soldering iron, adjust iron tip to 280 ° C max.
• Please find below recommended solder profile.
Storage Conditions
1) Do not store components in corrosive condition such as chloric or
2) Components before use should be stored under the condition with
3) It is recommended to use components within 6 months of incoming.
4) Do not open the minimal package until right before the use.
5) Do not store components under direct sunlight or dewy
mounting alignment.
capacitors over 500g.f.
sulfuric environment.
temperature of 5 to 40 degrees Celsius and humidity of 20 to 70%
RH.
environment.
Trimmer Capacitors
300
250
200
150
100
50
0
0
・Peak: 250 C Over 10 sec. max.
・Preheat: 160
50
・220°C Over 60 sec. max.
100
Time [Sec.]
190 C 120 sec.
150
200
250
Screwdrivers
Please use proper screwdriver for adjustment of the capacitor.
Kyocera can supply suitable ceramic type screwdrivers specially
designed for the use of CTZ series. Please contact your local AVX
office for the details.
CTZ3
Pin Head
⊕ : CTZ3 Phillips-head (Plus) Ceramic Screwdriver
CTZ2
Pin Head
⊕ : CTZ2 Phillips-head (Plus) Ceramic Screwdriver
(CTZ3 Phillips-head (Plus))
(CTZ2 Phillips-head (Plus))
Driver Head Type
(CTZ3 Phillips-head (Plus) Screwdriver)
(CTZ2 Phillips-head (Plus) Screwdriver)
(3.60)
(2.0)
96
110
110
125
1.2
0.19
0.85
0.35