PIC24F16KA102-I/ML Microchip Technology, PIC24F16KA102-I/ML Datasheet - Page 91

• Manufacturer Part Number: PIC24F16KA102-I/ML
• Description: IC PIC MCU FLASH 16K 28-QFN
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 24Fr

Specifications of PIC24F16KA102-I/ML

• Program Memory Type: FLASH
• Program Memory Size: 16KB (5.5K x 24)
• Package / Case: 28-VQFN Exposed Pad, 28-HVQFN, 28-SQFN, 28-DHVQFN
• Core Processor: PIC
• Core Size: 16-Bit
• Speed: 32MHz
• Connectivity: I²C, IrDA, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 24
• Eeprom Size: 512 x 8
• Ram Size: 1.5K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.6 V
• Data Converters: A/D 9x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC24F
• Core: PIC
• Data Bus Width: 16 bit
• Data Ram Size: 1.5 KB
• Interface Type: I2C/IrDA/SPI/UART
• Maximum Clock Frequency: 32 MHz
• Number Of Programmable I/os: 24
• Number Of Timers: 3
• Operating Supply Voltage: 1.8 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, DM240001
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 9-ch x 10-bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: MA240017 - MODULE PLUG-IN PIC24F16KA102 PIM
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

REGISTER 8-24:
© 2009 Microchip Technology Inc.
bit 15
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 15
bit 14
bit 13
bit 12
bit 11-8
bit 7
bit 6-0
CPUIRQ
R-0
U-0
—
CPUIRQ: Interrupt Request from Interrupt Controller CPU bit
1 = An interrupt request has occurred but has not yet been Acknowledged by the CPU (this will
0 = No interrupt request is left unacknowledged
Unimplemented: Read as ‘0’
VHOLD: Allows Vector Number Capture and Changes what Interrupt is Stored in VECNUM bit
1 = VECNUM will contain the value of the highest priority pending interrupt, instead of the current
0 = VECNUM will contain the value of the last Acknowledged interrupt (last interrupt that has occurred
Unimplemented: Read as ‘0’
ILR<3:0>: New CPU Interrupt Priority Level bits
1111 = CPU Interrupt Priority Level is 15
•
•
•
0001 = CPU Interrupt Priority Level is 1
0000 = CPU Interrupt Priority Level is 0
Unimplemented: Read as ‘0’
VECNUM<6:0>: Vector Number of Pending Interrupt bits
0111111 = Interrupt Vector pending is number 135
•
•
•
0000001 = Interrupt Vector pending is number 9
0000000 = Interrupt Vector pending is number 8
happen when the CPU priority is higher than the interrupt priority)
interrupt
with higher priority than the CPU, even if other interrupts are pending)
U-0
R-0
—
INTTREG: INTERRUPT CONTROL AND STATUS REGISTER
W = Writable bit
‘1’ = Bit is set
VHOLD
R/W-0
R-0
U-0
R-0
Preliminary
—
PIC24F16KA102 FAMILY
VECNUM<6:0>
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
R-0
R-0
R-0
R-0
ILR<3:0>
x = Bit is unknown
R-0
R-0
DS39927B-page 89
R-0
R-0
bit 8
bit 0