DSPIC33FJ16GS502-I/SO Microchip Technology, DSPIC33FJ16GS502-I/SO Datasheet - Page 333

• Manufacturer Part Number: DSPIC33FJ16GS502-I/SO
• Description: IC DSPIC MCU/DSP 16K 28-SOIC
• Manufacturer: Microchip Technology
• Series: dsPIC™ 33Fr

Specifications of DSPIC33FJ16GS502-I/SO

• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 40 MIPs
• Connectivity: I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 21
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 1x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-SOIC (7.5mm Width)
• Core Frequency: 40MHz
• Core Supply Voltage: 3.3V
• Embedded Interface Type: I2C, SPI, UART
• No. Of I/o's: 21
• Flash Memory Size: 16KB
• Supply Voltage Range: 3V To 3.6V
• Package: 28SOIC W
• Device Core: dsPIC
• Family Name: dsPIC33
• Maximum Speed: 40 MHz
• Operating Supply Voltage: 3.3 V
• Data Bus Width: 16 Bit
• Number Of Programmable I/os: 21
• Interface Type: I2C/SPI/UART
• On-chip Adc: 8-chx10-bit
• Number Of Timers: 3
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

TABLE A-1:
© 2009 Microchip Technology Inc.
Section 16.0 “Inter-Integrated
Circuit (I
Section 17.0 “Universal
Asynchronous Receiver Transmitter
(UART)”
Section 18.0 “High-Speed 10-bit
Analog-to-Digital Converter (ADC)”
2
C™)”
Section Name
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
MAJOR SECTION UPDATES (CONTINUED)
Removed the following sections, which are now available in the related
section of the dsPIC33F Family Reference Manual:
• 16.3 “I
• 16.4 “Baud Rate Generator” (retained Figure 16-1: I
• 16.5 “I
• 16.6 “Slave Address Masking”
• 16.7 “IPMI Support”
• 16.8 “General Call Address Support”
• 16.9 “Automatic Clock Stretch”
• 16.10 “Software Controlled Clock Stretching (STREN = 1)”
• 16.11 “Slope Control”
• 16.12 “Clock Arbitration”
• 16.13 “Multi-Master Communication, Bus Collision, and Bus Arbitration
Removed the following sections, which are now available in the related
section of the dsPIC33F Family Reference Manual:
• 17.1 “UART Baud Rate Generator”
• 17.2 “Transmitting in 8-bit Data Mode
• 17.3 “Transmitting in 9-bit Data Mode
• 17.4 “Break and Sync Transmit Sequence”
• 17.5 “Receiving in 8-bit or 9-bit Data Mode”
• 17.6 “Flow Control Using UxCTS and UxRTS Pins”
• 17.7 “Infrared Support”
Removed IrDA references and Note 1, and updated the bit and bit value
descriptions for UTXINV (UxSTA<14>) in the UARTx Status and Control
Register (see Register 17-2).
Updated bit value information for A/D Control Register (see Register 18-1).
Updated TRGSRC6 bit value for Timer1 period match in the A/D Convert
Pair Control Register 3 (see Register 18-8).
2
2
Preliminary
C Interrupts”
C Module Addresses
Update Description
2
C Block Diagram)
DS70318D-page 331