PIC24HJ64GP506-I/PT Microchip Technology, PIC24HJ64GP506-I/PT Datasheet

IC PIC MCU FLASH 32KX16 64TQFP

PIC24HJ64GP506-I/PT

Manufacturer Part Number
PIC24HJ64GP506-I/PT
Description
IC PIC MCU FLASH 32KX16 64TQFP
Manufacturer
Microchip Technology
Series
PIC® 24Hr

Specifications of PIC24HJ64GP506-I/PT

Program Memory Type
FLASH
Program Memory Size
64KB (22K x 24)
Package / Case
64-TFQFP
Core Processor
PIC
Core Size
16-Bit
Speed
40 MIPs
Connectivity
CAN, I²C, IrDA, LIN, SPI, UART/USART
Peripherals
Brown-out Detect/Reset, DMA, POR, PWM, WDT
Number Of I /o
53
Ram Size
8K x 8
Voltage - Supply (vcc/vdd)
3 V ~ 3.6 V
Data Converters
A/D 18x10b/12b
Oscillator Type
Internal
Operating Temperature
-40°C ~ 85°C
Processor Series
PIC24HJ
Core
PIC
Data Bus Width
16 bit
Data Ram Size
8 KB
Interface Type
3-Wire/I2C/USART
Maximum Clock Frequency
40 MHz
Number Of Programmable I/os
53
Number Of Timers
13
Operating Supply Voltage
0 V to 2.5 V
Maximum Operating Temperature
+ 85 C
Mounting Style
SMD/SMT
3rd Party Development Tools
52713-733, 52714-737, 53276-922, EWDSPIC
Development Tools By Supplier
PG164130, DV164035, DV244005, DV164005
Minimum Operating Temperature
- 40 C
On-chip Adc
18-ch x 12-bit
Controller Family/series
PIC24
No. Of I/o's
53
Ram Memory Size
8KB
Cpu Speed
40MIPS
No. Of Timers
13
Embedded Interface Type
CAN, I2C, SPI, UART
Rohs Compliant
Yes
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
For Use With
876-1004 - PIC24 BREAKOUT BOARDDM300024 - KIT DEMO DSPICDEM 1.1MA240012 - MODULE PLUG-IN PIC24H 100QFPDV164033 - KIT START EXPLORER 16 MPLAB ICD2DM300019 - BOARD DEMO DSPICDEM 80L STARTERDM240001 - BOARD DEMO PIC24/DSPIC33/PIC32AC164327 - MODULE SKT FOR 64TQFP
Eeprom Size
-
Lead Free Status / Rohs Status
Lead free / RoHS Compliant

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
PIC24HJ64GP506-I/PT
Manufacturer:
Microchip Technology
Quantity:
352
Part Number:
PIC24HJ64GP506-I/PT
Manufacturer:
Microchip Technology
Quantity:
10 000
Part Number:
PIC24HJ64GP506-I/PT
Manufacturer:
MICROCHIP/微芯
Quantity:
20 000
Part Number:
PIC24HJ64GP506-I/PT
Quantity:
907
PIC24HJXXXGPXXX,
(Rev. A0/A1) Silicon Errata
The PIC24H Engineering Samples (Rev. A0/A1) you
received were found to conform to the specifications
and functionality described in the following documents:
• DS70175 – “PIC24H Family Data Sheet”
• DS70157 – “dsPIC30F/33F Programmer’s
• DS70046 – “dsPIC30F Family Reference Manual”
The exceptions to the specifications in the documents
listed above are described in this section. The specific
devices for which these exceptions are described are
listed below:
• PIC24HJ128GP506-PT ES
• PIC24HJ256GP206-PT ES
• PIC24HJ256GP610-PF ES
• PIC24HJ256GP610-PT ES
PIC24H Rev. A0/A1 silicon is identified by performing a
“Reset and Connect” operation to the device using
MPLAB
output window will show either:
The errata described in this section will be addressed
in future revisions of silicon.
© 2006 Microchip Technology Inc.
Reference Manual”
PIC24H Engineering Samples Rev. A0/A1 Silicon Errata
1. A successful connection to the device
2. Warning
®
specified in Configure>Select Device
Invalid target device id. If this mes-
sage is received, consult the “dsPIC33F Flash
Programming Specification” (DS70152) to ver-
ify the device ID. This document contains
device IDs for both the dsPIC33F and PIC24H
devices. This device mismatch will be fixed in
future revisions of MPLAB IDE.
ICD 2 with MPLAB IDE v7.31.01 or later. The
message
ICD
Warn0020:
PIC24HJXXXGPXXX
Silicon Errata Summary
The following list summarizes the errata described in
further detail through the remainder of this document:
1.
2.
3.
4.
5.
6.
7.
8.
9.
SPI with 1:1 Prescaler
The SPI modules do not function correctly when
the SPI clock prescale ratio is set to 1:1.
SPI Master Reception for Bit Rates above
8 Mbps
SPI Master reception does not function correctly at
bit rates higher than 8 Mbps, if the data is sampled
at the middle of the serial clock period.
ADC with Sample/Hold CH3
Sample/Hold amplifier CH3 does not function
correctly for the Analog-to-Digital Converter
modules.
LATC and LATD Reads
The LATC and LATD register reads do not
function.
DMA Single-Shot Mode
The Direct Memory Access Single-Shot mode
does not function correctly.
Windowed Watchdog Timer
When the Windowed WDT option is enabled and
the WDT is disabled, a WDT time out will occur.
Timer3 as A/D Conversion Trigger Source
Timer2 and Timer3, when configured as a single
32-bit timer, may not initiate an A/D conversion if
the PR3 register is set to ‘0’ and Timer3 is selected
as the A/D conversion trigger source.
UART Auto-Baud
The UART FIFO will be loaded with incorrect data
if the UxBRG register is not initialized to a specific
value.
Doze Mode
When Doze mode is enabled, any writes to a
peripheral SFR can cause other updates to that
register to cease to function for the duration of the
current CPU clock cycle.
DS80260B-page 1

Related parts for PIC24HJ64GP506-I/PT

PIC24HJ64GP506-I/PT Summary of contents

Page 1

... This device mismatch will be fixed in future revisions of MPLAB IDE. The errata described in this section will be addressed in future revisions of silicon. © 2006 Microchip Technology Inc. PIC24HJXXXGPXXX Silicon Errata Summary The following list summarizes the errata described in further detail through the remainder of this document: 1 ...

Page 2

... I C™ Module 2 The I C module does not wake-up from Sleep when it detects bus activity. The following sections will describe the errata and work around to these errata, where they may apply. © 2006 Microchip Technology Inc. ...

Page 3

... Do not use the Sample/Hold amplifier CH3 with the ADC1 or ADC2 module. You may use CH0, CH1 and CH2. © 2006 Microchip Technology Inc. 4. Module: LATC and LATD Reads The LATC and LATD register reads do not func- tion. Performing a read or read-modify-write oper- ...

Page 4

... Module: 10-bit ADC The ADC module INL is >±2 LSBs and DNL is >±1 LSB. Work around None. Future versions of the silicon will support <±2 LSBs INL and <±1 LSB DNL specifications, and signal acquisition time. © 2006 Microchip Technology Inc. ...

Page 5

... DISI instruction. Alter- natively, make sure that subsequent DISI instructions are called before the DISI counter decrements to zero. © 2006 Microchip Technology Inc. 14. Module: JTAG Programming JTAG programming does not work in silicon revision A0/A1. Work around None ...

Page 6

... Timer, 7 (Timer3 as A/D Conversion Trigger Source), 8 (UART Auto-Baud), 9 (Doze Mode), 10 (12-bit ADC), 11 (10-bit ADC), 12 (DMA Module: Interaction with EXCH Instruction), 13 (DISI Instruction), 14 (JTAG Programming), 15 (Internal FRC Oscillator), 16 (ECAN Loopback Mode), 17 (Clock Switch from Fail-Safe Clock Source) and Module). DS80260B-page 6 © 2006 Microchip Technology Inc. ...

Page 7

... PowerMate, PowerTool, REAL ICE, rfLAB, rfPICDEM, Select Mode, Smart Serial, SmartTel, Total Endurance, UNI/O, WiperLock and ZENA are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. SQTP is a service mark of Microchip Technology Incorporated in the U.S.A. All other trademarks mentioned herein are property of their respective companies. ...

Page 8

... Fax: 886-3-572-6459 Taiwan - Kaohsiung Tel: 886-7-536-4818 Fax: 886-7-536-4803 Taiwan - Taipei Tel: 886-2-2500-6610 Fax: 886-2-2508-0102 Thailand - Bangkok Tel: 66-2-694-1351 Fax: 66-2-694-1350 © 2006 Microchip Technology Inc. EUROPE Austria - Wels Tel: 43-7242-2244-399 Fax: 43-7242-2244-393 Denmark - Copenhagen Tel: 45-4450-2828 Fax: 45-4485-2829 France - Paris Tel: 33-1-69-53-63-20 ...

Related keywords