DSPIC33FJ128GP310A-I/PT Microchip Technology, DSPIC33FJ128GP310A-I/PT Datasheet - Page 166

IC DSPIC MCU/DSP 128K 100-TQFP

DSPIC33FJ128GP310A-I/PT

Manufacturer Part Number
DSPIC33FJ128GP310A-I/PT
Description
IC DSPIC MCU/DSP 128K 100-TQFP
Manufacturer
Microchip Technology
Series
dsPIC™ 33Fr
Datasheet

Specifications of DSPIC33FJ128GP310A-I/PT

Program Memory Type
FLASH
Program Memory Size
128KB (128K x 8)
Package / Case
100-TFQFP
Core Processor
dsPIC
Core Size
16-Bit
Speed
40 MIPs
Connectivity
I²C, IrDA, LIN, SPI, UART/USART
Peripherals
AC'97, Brown-out Detect/Reset, DMA, I²S, POR, PWM, WDT
Number Of I /o
85
Ram Size
16K x 8
Voltage - Supply (vcc/vdd)
3 V ~ 3.6 V
Data Converters
A/D 32x10b/12b
Oscillator Type
Internal
Operating Temperature
-40°C ~ 85°C
Product
DSCs
Data Bus Width
16 bit
Processor Series
DSPIC33F
Core
dsPIC
Maximum Clock Frequency
40 MHz
Number Of Programmable I/os
85
Data Ram Size
16 KB
Maximum Operating Temperature
+ 85 C
Mounting Style
SMD/SMT
3rd Party Development Tools
52713-733, 52714-737, 53276-922, EWDSPIC
Development Tools By Supplier
PG164130, DV164035, DV244005, DV164005, PG164120, DM240001, DV164033
Minimum Operating Temperature
- 40 C
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
For Use With
876-1001 - DSPIC33 BREAKOUT BOARD
Eeprom Size
-
Lead Free Status / Rohs Status
Lead free / RoHS Compliant

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
DSPIC33FJ128GP310A-I/PT
Manufacturer:
Microchip
Quantity:
212
Part Number:
DSPIC33FJ128GP310A-I/PT
Manufacturer:
Microchip Technology
Quantity:
10 000
dsPIC33FJXXXGPX06A/X08A/X10A
11.2
In addition to the PORT, LAT and TRIS registers for
data control, some port pins can also be individually
configured for either digital or open-drain output. This is
controlled by the Open-Drain Control register, ODCx,
associated with each port. Setting any of the bits
configures the corresponding pin to act as an
open-drain output.
The open-drain feature allows the generation of
outputs higher than V
tolerant pins by using external pull-up resistors. The
maximum open-drain voltage allowed is the same as
the maximum V
See “Pin Diagrams (Continued)” for the available
pins and their functionality.
11.3
The use of the ADxPCFGH, ADxPCFGL and TRIS
registers control the operation of the ADC port pins.
The port pins that are desired as analog inputs must
have their corresponding TRIS bit set (input). If the
TRIS bit is cleared (output), the digital output level (V
or V
Clearing any bit in the ADxPCFGH or ADxPCFGL
register configures the corresponding bit to be an
analog pin. This is also the Reset state of any I/O pin
that has an analog (ANx) function associated with it.
When reading the PORT register, all pins configured as
analog input channels will read as cleared (a low level).
Pins configured as digital inputs will not convert an
analog input. Analog levels on any pin that is defined as
a digital input (including the ANx pins) can cause the
input buffer to consume current that exceeds the
device specifications.
EXAMPLE 11-1:
DS70593B-page 166
Note:
Note:
MOV
MOV
NOP
btss
OL
) is converted.
Open-Drain Configuration
Configuring Analog Port Pins
0xFF00, W0
W0, TRISBB
PORTB, #13
In devices with two ADC modules, if the
corresponding
AD1PCFGH(L) and AD2PCFGH(L) is
cleared, the pin is configured as an analog
input.
The voltage on an analog input pin can be
between -0.3V to (V
IH
specification.
DD
PORT WRITE/READ EXAMPLE
(e.g., 5V) on any desired 5V
PCFG
DD
; Configure PORTB<15:8> as inputs
; and PORTB<7:0> as outputs
; Delay 1 cycle
; Next Instruction
+ 0.3 V).
bit
in
either
Preliminary
OH
11.4
One instruction cycle is required between a port
direction change or port write operation and a read
operation of the same port. Typically, this instruction
would be a NOP.
11.5
The input change notification function of the I/O ports
allows
devices to generate interrupt requests to the processor
in response to a change-of-state on selected input pins.
This
change-of-states even in Sleep mode, when the clocks
are disabled. Depending on the device pin count, there
are up to 24 external signals (CN0 through CN23) that
can be selected (enabled) for generating an interrupt
request on a change-of-state.
There are four control registers associated with the CN
module. The CNEN1 and CNEN2 registers contain the
CN interrupt enable (CNxIE) control bits for each of the
CN input pins. Setting any of these bits enables a CN
interrupt for the corresponding pins.
Each CN pin also has a weak pull-up connected to it.
The pull-ups act as a current source that is connected
to the pin and eliminate the need for external resistors
when push button or keypad devices are connected.
The pull-ups are enabled separately using the CNPU1
and CNPU2 registers, which contain the weak pull-up
enable (CNxPUE) bits for each of the CN pins. Setting
any of the control bits enables the weak pull-ups for the
corresponding pins.
Note:
feature
I/O Port Write/Read Timing
Input Change Notification
the
Pull-ups on change notification pins
should always be disabled whenever the
port pin is configured as a digital output.
is
dsPIC33FJXXXGPX06A/X08A/X10A
capable
 2009 Microchip Technology Inc.
of
detecting
input

Related parts for DSPIC33FJ128GP310A-I/PT