DSPIC33FJ128GP706A-I/PT Microchip Technology, DSPIC33FJ128GP706A-I/PT Datasheet - Page 13

• Manufacturer Part Number: DSPIC33FJ128GP706A-I/PT
• Description: IC DSPIC MCU/DSP 128K 64-TQFP
• Manufacturer: Microchip Technology
• Series: dsPIC™ 33Fr

Specifications of DSPIC33FJ128GP706A-I/PT

• Program Memory Type: FLASH
• Program Memory Size: 128KB (128K x 8)
• Package / Case: 64-TFQFP
• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 40 MIPs
• Connectivity: CAN, I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: AC'97, Brown-out Detect/Reset, DMA, I²S, POR, PWM, WDT
• Number Of I /o: 53
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 18x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Product: DSCs
• Data Bus Width: 16 bit
• Processor Series: DSPIC33F
• Core: dsPIC
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 53
• Data Ram Size: 16 KB
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DM240001, DV164033
• Minimum Operating Temperature: - 40 C
• Core Frequency: 40MHz
• Core Supply Voltage: 3.3V
• Embedded Interface Type: I2C, SPI, UART
• No. Of I/o's: 53
• Flash Memory Size: 128KB
• Supply Voltage Range: 3V To 3.6V
• Rohs Compliant: Yes
• Package: 64TQFP
• Device Core: dsPIC
• Family Name: dsPIC33
• Maximum Speed: 40 MHz
• Operating Supply Voltage: 3.3 V
• Interface Type: CAN/I2C/SPI/UART
• On-chip Adc: 36-chx10-bit|36-chx12-bit
• Number Of Timers: 9
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 876-1001 - DSPIC33 BREAKOUT BOARD
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

.
FIGURE 1-1:
1.4
© 2009 Microchip Technology Inc.
ICD Interface
GETTING STARTED
UART Interface
MCP3909 / dsPIC33F 3-Phase Energy Meter Reference Design.
To describe how to use the MCP3909 / dsPIC33F 3-Phase Energy Meter Reference
Design, the following example is given using a 4-wire, 3-phase, 220VAC line voltage
and connection. The rated current of the energy meter is 5(20)A.
The energy meters are not shipped fully calibrated, and a full calibration should be
performed to show the true meter accuracy. See Chapter 4. “Meter Calibration” for
more information.
All connections described in this section are dependent on the choice of current
sensing element and a secondary external transformer may be required in higher
current meter designs.
dsPIC33
MCP3909
Meter Overview
Current Transformer
DS51723A-page 13