DSPIC33FJ128GP710A-I/PF Microchip Technology, DSPIC33FJ128GP710A-I/PF Datasheet - Page 246

• Manufacturer Part Number: DSPIC33FJ128GP710A-I/PF
• Description: IC DSPIC MCU/DSP 128K 100-TQFP
• Manufacturer: Microchip Technology
• Series: dsPIC™ 33Fr

Specifications of DSPIC33FJ128GP710A-I/PF

• Program Memory Type: FLASH
• Program Memory Size: 128KB (128K x 8)
• Package / Case: 100-TQFP, 100-VQFP
• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 40 MIPs
• Connectivity: CAN, I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: AC'97, Brown-out Detect/Reset, DMA, I²S, POR, PWM, WDT
• Number Of I /o: 85
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 32x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Product: DSCs
• Data Bus Width: 16 bit
• Processor Series: DSPIC33F
• Core: dsPIC
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 85
• Data Ram Size: 16 KB
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DM240001, DV164033
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 876-1001 - DSPIC33 BREAKOUT BOARD
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

dsPIC33FJXXXGPX06A/X08A/X10A
REGISTER 21-9:
REGISTER 21-10: ADxPCFGL: ADCx PORT CONFIGURATION REGISTER LOW
DS70593B-page 246
bit 15
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 15-0
bit 15
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 15-0
Note 1: On devices without 32 analog inputs, all PCFG bits are R/W by user. However, PCFG bits are ignored on
Note 1: On devices without 16 analog inputs, all PCFG bits are R/W by user. However, PCFG bits are ignored on
PCFG31
PCFG23
PCFG15
PCFG7
R/W-0
R/W-0
R/W-0
R/W-0
2: ADC2 only supports analog inputs AN0-AN15; therefore, no ADC2 port Configuration register exists.
3: PCFGx = ANx, where x = 16 through 31.
4: PCFGx bits have no effect if ADC module is disabled by setting ADxMD bit in the PMDx register. In this
2: On devices with two analog-to-digital modules, both AD1PCFGL and AD2PCFGL will affect the
3: PCFGx = ANx, where x = 0 through 15.
4: PCFGx bits have no effect if ADC module is disabled by setting ADxMD bit in the PMDx register. In this
ports without a corresponding input on device.
case all port pins multiplexed with ANx will be in Digital mode.
ports without a corresponding input on device.
configuration of port pins multiplexed with AN0-AN15.
case all port pins multiplexed with ANx will be in Digital mode
PCFG<31:16>: ADC Port Configuration Control bits
1 = Port pin in Digital mode, port read input enabled, ADC input multiplexer connected to AV
0 = Port pin in Analog mode, port read input disabled, ADC samples pin voltage
PCFG<15:0>: ADC Port Configuration Control bits
1 = Port pin in Digital mode, port read input enabled, ADC input multiplexer connected to AV
0 = Port pin in Analog mode, port read input disabled, ADC samples pin voltage
PCFG30
PCFG22
PCFG14
PCFG6
R/W-0
R/W-0
R/W-0
R/W-0
AD1PCFGH: ADC1 PORT CONFIGURATION REGISTER HIGH
W = Writable bit
‘1’ = Bit is set
W = Writable bit
‘1’ = Bit is set
PCFG29
PCFG21
PCFG13
PCFG5
R/W-0
R/W-0
R/W-0
R/W-0
PCFG28
PCFG20
PCFG12
PCFG4
R/W-0
R/W-0
R/W-0
R/W-0
Preliminary
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
PCFG27
PCFG19
PCFG11
PCFG3
R/W-0
R/W-0
R/W-0
R/W-0
PCFG26
PCFG18
PCFG10
PCFG2
R/W-0
R/W-0
R/W-0
R/W-0
 2009 Microchip Technology Inc.
x = Bit is unknown
x = Bit is unknown
PCFG25
PCFG17
PCFG9
PCFG1
R/W-0
R/W-0
R/W-0
R/W-0
(1,2,3,4)
(1,2,3,4)
PCFG24
PCFG16
PCFG8
PCFG0
R/W-0
R/W-0
R/W-0
R/W-0
SS
SS
bit 8
bit 0
bit 8
bit 0