M30626FJPFP#U5C Renesas Electronics America, M30626FJPFP#U5C Datasheet - Page 179

• Manufacturer Part Number: M30626FJPFP#U5C
• Description: IC M16C MCU FLASH 512K 100QFP
• Manufacturer: Renesas Electronics America
• Series: M16C™ M16C/60r

Specifications of M30626FJPFP#U5C

• Core Processor: M16C/60
• Core Size: 16-Bit
• Speed: 24MHz
• Connectivity: I²C, IEBus, UART/USART
• Peripherals: DMA, WDT
• Number Of I /o: 85
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 31K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 26x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 85°C
• Package / Case: 100-QFP
• For Use With: 867-1000 - KIT QUICK START RENESAS 62PR0K33062PS001BE - R0K33062P STARTER KITR0K33062PS000BE - KIT EVAL STARTER FOR M16C/62PM3062PT3-CPE-3 - EMULATOR COMPACT M16C/62P/30P
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

M16C/62P Group (M16C/62P, M16C/62PT)
Rev.2.41
REJ09B0185-0241
15.2.3
Table 15.8
NOTES:
Count Source
Count Operation
Count Start Condition
Count Stop Condition
Interrupt Request
Generation Timing
TBiIN Pin Function
Read from Timer
Write to Timer
1. Interrupt request is not generated when the first effective edge is input after the timer started
2. Value read from TBi register is indeterminate until the second valid edge is input after the timer
3. The TB0S to TB2S bits are assigned to the bit 5 to bit 7 in the TABSR register, and the TB3S to
In pulse period and pulse width measurement mode, the timer measures pulse period or pulse width of an
external signal (see Table 15.8). Figure 15.21 shows TBiMR Register in Pulse Period and Pulse Width
Measurement Mode. Figure 15.22 shows the Operation Timing when Measuring a Pulse Period. Figure 15.23
shows the Operation Timing when Measuring a Pulse Width.
counting.
starts counting.
TB5S bits are assigned to the bit 5 to bit 7 in the TBSR register.
Jan 10, 2006
Item
Pulse Period and Pulse Width Measurement Mode
Specifications in Pulse Period and Pulse Width Measurement Mode
Page 162 of 390
f1, f2, f8, f32, fC32
• Up-count
• Counter value is transferred to reload register at an effective edge of
Set TBiS (i=0 to 5) bit
Set TBiS bit to “0” (= stop counting)
• When an effective edge of measurement pulse is input
• Timer overflow. When an overflow occurs, MR3 bit in the TBiMR register is set
Measurement pulse input
Contents of the reload register (measurement result) can be read by reading TBi
register
Value written to TBi register is written to neither reload register nor counter
measurement pulse. The counter value is set to “0000h” to continue counting.
to “1” (overflowed) simultaneously. MR3 bit is set to “0” (no overflow) by
writing to TBiMR register at the next count timing or later after MR3 bit was set
to “1”. At this time, make sure TBiS bit is set to “1” (start counting).
(2)
(3)
to “1” (= start counting)
Specification
(1)
15. Timers