M30626FJPFP#U5C Renesas Electronics America, M30626FJPFP#U5C Datasheet - Page 60

• Manufacturer Part Number: M30626FJPFP#U5C
• Description: IC M16C MCU FLASH 512K 100QFP
• Manufacturer: Renesas Electronics America
• Series: M16C™ M16C/60r

Specifications of M30626FJPFP#U5C

• Core Processor: M16C/60
• Core Size: 16-Bit
• Speed: 24MHz
• Connectivity: I²C, IEBus, UART/USART
• Peripherals: DMA, WDT
• Number Of I /o: 85
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 31K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 26x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 85°C
• Package / Case: 100-QFP
• For Use With: 867-1000 - KIT QUICK START RENESAS 62PR0K33062PS001BE - R0K33062P STARTER KITR0K33062PS000BE - KIT EVAL STARTER FOR M16C/62PM3062PT3-CPE-3 - EMULATOR COMPACT M16C/62P/30P
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

M16C/62P Group (M16C/62P, M16C/62PT)
Rev.2.41
REJ09B0185-0241
5.3
5.4
5.5
The microcomputer resets pins, the CPU and SFR when the PM03 bit in the PM0 register is set to “1”
(microcomputer reset). Then the microcomputer executes the program in an address determined by the reset vector.
Set the PM03 bit to “1” while the main clock is selected as the CPU clock and the main clock oscillation is stable.
In the software reset, the microcomputer does not reset a part of the SFR. Refer to 4. Special Function Register
(SFR) for details.
Processor mode remains unchanged since the PM01 to PM00 bits in the PM0 register are not reset.
The microcomputer resets pins, the CPU and SFR when the CM06 bit in the CM0 register is set to “1” (reset) and
the watchdog timer underflows. Then the microcomputer executes the program in an address determined by the
reset vector.
In the watchdog timer reset, the microcomputer does not reset a part of the SFR. Refer to 4. Special Function
Register (SFR) for details. Processor mode remains unchanged since the PM01 to PM00 bits in the PM0 register
are not reset.
The microcomputer resets and stops pins, the CPU and SFR when the CM27 bit in the CM2 register is 0, if it
detects main clock oscillation circuit stop. Refer to 10.6 Oscillation Stop and Re-oscillation Detect Function for
details.
In the oscillation stop detection reset, the microcomputer does not reset a part of the SFR. Refer to 4. Special
Function Register (SFR) for details. Processor mode remains unchanged since the PM01 to PM00 bits in the
PM0 register are not reset.
Software Reset
Oscillation Stop Detection Reset
Jan 10, 2006
Watchdog Timer Reset
Page 43 of 390
5. Reset