MC908LJ24CPKE Freescale Semiconductor, MC908LJ24CPKE Datasheet - Page 131

• Manufacturer Part Number: MC908LJ24CPKE
• Description: IC MCU 8BIT 24K FLASH 80-LQFP
• Manufacturer: Freescale Semiconductor
• Series: HC08r

Specifications of MC908LJ24CPKE

• Core Processor: HC08
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: I²C, IRSCI, SPI
• Peripherals: LCD, LVD, POR, PWM
• Number Of I /o: 48
• Program Memory Size: 24KB (24K x 8)
• Program Memory Type: FLASH
• Ram Size: 768 x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 6x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 80-LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

8.6.4 PLL VCO Range Select Register
MC68HC908LJ24/LK24 — Rev. 2.1
Freescale Semiconductor
NOTE:
Address:
The PLL VCO range select register (PMRS) contains the programming
information required for the hardware configuration of the VCO.
VRS[7:0] — VCO Range Select Bits
The VCO range select bits have built-in protection such that they cannot
be written when the PLL is on (PLLON = 1) and such that the VCO clock
cannot be selected as the source of the base clock (BCS = 1) if the VCO
range select bits are all clear.
The PLL VCO range select register must be programmed correctly.
Incorrect programming can result in failure of the PLL to achieve lock.
Reset:
Read:
Write:
These read/write bits control the hardware center-of-range linear
multiplier L which, in conjunction with E (See
8.4.6 Programming the
controls the hardware center-of-range frequency, f
cannot be written when the PLLON bit in the PCTL is set. (See
Special Programming
range select register disables the PLL and clears the BCS bit in the
PLL control register (PCTL). (See
and
register to $40 for a default range multiply value of 64.
8.4.7 Special Programming
Figure 8-8. PLL VCO Range Select Register (PMRS)
$003A
VRS7
Bit 7
0
Clock Generator Module (CGM)
VRS6
6
1
VRS5
5
0
Exceptions.) A value of $00 in the VCO
PLL, and
VRS4
4
0
8.4.8 Base Clock Selector Circuit
Exceptions.). Reset initializes the
8.6.1 PLL Control
VRS3
3
0
Clock Generator Module (CGM)
8.4.3 PLL
VRS2
2
0
VRS
. VRS[7:0]
Register.),
VRS1
CGM Registers
Circuits,
1
0
Data Sheet
VRS0
Bit 0
8.4.7
0
131