HD6417041AVF16V Renesas Electronics America, HD6417041AVF16V Datasheet - Page 54

• Manufacturer Part Number: HD6417041AVF16V
• Description: IC SUPERH MCU ROMLESS 144QFP
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7040r

Specifications of HD6417041AVF16V

• Core Processor: SH-2
• Core Size: 32-Bit
• Speed: 28.7MHz
• Connectivity: EBI/EMI, SCI
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 98
• Program Memory Type: ROMless
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 144-QFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -

Section 4 Instruction Features
4.5.2
The DSP command has single data transfer instructions (MOVS.W and MOVS.L) that load data
to DSP registers and store data from DSP registers. With these instructions, the R2–R5 registers
are used as address registers (As) for single data transfers.
There are four types of data addressing for single data transfer instructions.
The address pointer uses the R8 register as its index register (Is). Figure 4.2 shows the single data
transfer addressing.
Rev. 5.00 Jun 30, 2004 page 38 of 512
REJ09B0171-0500O
Address registers with no update: The As register is the address pointer. It is not updated.
Addition index register addressing: The As register is the address pointer. The value of the Is
register is added to the As register after data transfer (post-increment).
Increment address register addressing: The As register is the address pointer. +2 or +4 is added
to it after data transfer (post-increment).
Decrement address register addressing: The As register is the address pointer. –2 or –4 (or +2
or +4) is added to it before data transfer (pre-decrement).
+2 (INC)
+0 (No update)
Notes: 1.
Single Data Addressing
2.
Adder added for DSP processing
All three addressing methods (increment, index register addition (Ix, Iy), and
no update) are post-increment methods. To decrement the address pointer, set
the index register to –2 or –4.
R8[Ix]
Figure 4.1 X and Y Data Transfer Addressing
ALU
R4[Ax]
R5[Ax]
+2 (INC)
+0 (No update)
R9[Iy]
AU*
1
R6[Ay]
R7[Ay]