ATMEGA88PA-CCU Atmel, ATMEGA88PA-CCU Datasheet - Page 554

• Manufacturer Part Number: ATMEGA88PA-CCU
• Description: IC MCU AVR 8K FLASH 32VQFN
• Manufacturer: Atmel
• Series: AVR® ATmegar

Specifications of ATMEGA88PA-CCU

• Core Processor: AVR
• Core Size: 8-Bit
• Speed: 20MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 23
• Program Memory Size: 8KB (4K x 16)
• Program Memory Type: FLASH
• Eeprom Size: 512 x 8
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 32-VFQFN
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

34.7
34.7.1
34.7.2
34.7.3
34.7.4
8271C–AVR–08/10
Errata ATmega328
Rev D
Rev C
Rev B
Rev A
The revision letter in this section refers to the revision of the ATmega328 device.
•
1.
Not sampled.
•
•
1. Unstable 32 kHz Oscillator
2. Unstable 32 kHz Oscillator
•
•
1. Unstable 32 kHz Oscillator
2. Unstable 32 kHz Oscillator
ATmega48A/48PA/88A/88PA/168A/168PA/328/328
Analog MUX can be turned off when setting ACME bit
Analog MUX can be turned off when setting ACME bit
Unstable 32 kHz Oscillator
Analog MUX can be turned off when setting ACME bit
Unstable 32 kHz Oscillator
Analog MUX can be turned off when setting ACME bit
If the ACME (Analog Comparator Multiplexer Enabled) bit in ADCSRB is set while MUX3 in
ADMUX is '1' (ADMUX[3:0]=1xxx), all MUX'es are turned off until the ACME bit is cleared.
Problem Fix/Workaround
Clear the MUX3 bit before setting the ACME bit.
If the ACME (Analog Comparator Multiplexer Enabled) bit in ADCSRB is set while MUX3 in
ADMUX is '1' (ADMUX[3:0]=1xxx), all MUX'es are turned off until the ACME bit is cleared.
Problem Fix/Workaround
Clear the MUX3 bit before setting the ACME bit.
The 32 kHz oscillator does not work as system clock. The 32 kHz oscillator used as asyn-
chronous timer is inaccurate.
Problem Fix/ Workaround
None.
If the ACME (Analog Comparator Multiplexer Enabled) bit in ADCSRB is set while MUX3 in
ADMUX is '1' (ADMUX[3:0]=1xxx), all MUX'es are turned off until the ACME bit is cleared.
Problem Fix/Workaround
Clear the MUX3 bit before setting the ACME bit.
The 32 kHz oscillator does not work as system clock. The 32 kHz oscillator used as asyn-
chronous timer is inaccurate.
Problem Fix/ Workaround
None.
554