PIC24F16KA102-I/SS Microchip Technology, PIC24F16KA102-I/SS Datasheet - Page 30

• Manufacturer Part Number: PIC24F16KA102-I/SS
• Description: IC PIC MCU FLASH 16K 28-SSOP
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 24Fr

Specifications of PIC24F16KA102-I/SS

• Program Memory Type: FLASH
• Program Memory Size: 16KB (5.5K x 24)
• Package / Case: 28-SSOP
• Core Processor: PIC
• Core Size: 16-Bit
• Speed: 32MHz
• Connectivity: I²C, IrDA, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 24
• Eeprom Size: 512 x 8
• Ram Size: 1.5K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.6 V
• Data Converters: A/D 9x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC24F
• Core: PIC
• Data Bus Width: 16 bit
• Data Ram Size: 1.5 KB
• Interface Type: I2C/IrDA/SPI/UART
• Maximum Clock Frequency: 32 MHz
• Number Of Programmable I/os: 24
• Number Of Timers: 3
• Operating Supply Voltage: 1.8 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, DM240001
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 9-ch x 10-bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: MA240017 - MODULE PLUG-IN PIC24F16KA102 PIM
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

PIC24FXXKAXXX
TABLE 4-2:
DS39919A-page 30
IESO
I2C1SEL
MCLRE
OSCIOFNC
POSCMD<1:0>
POSCFREQ<1:0> FOSC<4:3>
PWRTEN
RTCCKSEL
SOSCSEL
WDTPRE
WDTPOST<3:0>
WINDIS
Note 1:
Bit Field
2:
(2)
(1)
Applies only to the 28-pin device.
The MCLRE fuse can only be changed when using the V
from accidentally locking out the device from low-voltage test entry.
PIC24FXXKAXXX FAMILY CONFIGURATION BITS DESCRIPTION (CONTINUED)
FOSCSEL<7>
FPOR<4>
FPOR<7>
FOSC<2>
FOSC<1:0>
FPOR<3>
FDS<5>
FOSC<5>
FWDT<4>
FWDT<3:0>
FWDT<6>
Register
Internal External Switchover bit
1 = Internal External Switchover mode enabled (Two-Speed Start-up enabled)
0 = Internal External Switchover mode disabled (Two-Speed Start-up
Alternate I2C1 Pin Mapping bit
0 = Alternate location for SCL1/SDA1 pins
1 = Default location for SCL1/SDA1 pins
MCLR Pin Enable bit
1 = MCLR pin enabled; RA5 input pin disabled
0 = RA5 input pin enabled; MCLR disabled
CLKO Enable Configuration bit
1 = CLKO output signal active on the OSCO pin; primary oscillator must be
0 = CLKO output disabled
Primary Oscillator Configuration bits
11 = Primary oscillator disabled
10 = HS Oscillator mode selected (4 MHz-25 MHz)
01 = XT Oscillator mode selected (100 kHz-4 MHz)
00 = External Clock mode selected
Primary Oscillator Frequency Range Configuration bits
11 = Primary oscillator/external clock input frequency greater than 8 MHz
10 = Primary oscillator/external clock input frequency between 100 kHz and
01 = Primary oscillator/external clock input frequency less than 100 kHz
00 = Reserved, do not use
Power-up Timer Enable bit
0 = PWRT disabled
1 = PWRT enabled
RTCC Reference Clock Select bit
1 = RTCC uses SOSC as reference clock
0 = RTCC uses LPRC as reference clock
Secondary Oscillator Select bit
1 = Secondary oscillator configured for high-power operation
0 = Secondary oscillator configured for low-power operation
WDT Prescaler
1 = WDT prescaler ratio of 1:128
0 = WDT prescaler ratio of 1:32
Watchdog Timer Postscale Select bits
1111 = 1:32,768
1110 = 1:16,384
•
•
•
0001 = 1:2
0000 = 1:1
Windowed Watchdog Timer Disable bit
1 = Standard WDT selected; windowed WDT disabled
0 = Windowed WDT enabled
disabled)
disabled or configured for the External Clock mode (EC) for the CLKO to
be active (POSCMD<1:0> = 11 or 00)
Advance Information
8 MHz
(2)
PP
(1)
-Based Test mode entry. This prevents a user
Description
© 2008 Microchip Technology Inc.