PIC24F16KA102-I/SS Microchip Technology, PIC24F16KA102-I/SS Datasheet - Page 36

• Manufacturer Part Number: PIC24F16KA102-I/SS
• Description: IC PIC MCU FLASH 16K 28-SSOP
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 24Fr

Specifications of PIC24F16KA102-I/SS

• Program Memory Type: FLASH
• Program Memory Size: 16KB (5.5K x 24)
• Package / Case: 28-SSOP
• Core Processor: PIC
• Core Size: 16-Bit
• Speed: 32MHz
• Connectivity: I²C, IrDA, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 24
• Eeprom Size: 512 x 8
• Ram Size: 1.5K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.6 V
• Data Converters: A/D 9x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC24F
• Core: PIC
• Data Bus Width: 16 bit
• Data Ram Size: 1.5 KB
• Interface Type: I2C/IrDA/SPI/UART
• Maximum Clock Frequency: 32 MHz
• Number Of Programmable I/os: 24
• Number Of Timers: 3
• Operating Supply Voltage: 1.8 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, DM240001
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 9-ch x 10-bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: MA240017 - MODULE PLUG-IN PIC24F16KA102 PIM
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

PIC24FXXKAXXX
5.2.8
The READP command instructs the programming
executive to read N 24-bit words of code memory,
including Configuration registers, starting from the
24-bit address specified by Addr_MSB and Addr_LS.
The entire data returned in response to this command
uses
Section 5.2.2 “Packed Data Format”.
Expected Response (2 + 3 * N/2 words for N even):
Expected Response (4 + 3 * (N – 1)/2 words for N odd):
DS39919A-page 36
15
Opcode
Length
N
Reserved
Addr_MSB
Addr_LS
Note:
Note:
Opcode
1200h
2 + 3 * N/2
LSB program memory word 1
...
LSB data word N
1200h
4 + 3 * (N – 1)/2
LSB program memory word 1
...
MSB of program memory word N (zero-padded)
Field
the
Reserved
12 11
READP COMMAND
This command can only be used to read
24-bit data.
Reading unimplemented memory will
cause the programming executive to
reset. Ensure that only memory locations
present on a particular device are
accessed.
packed
2h
4h
Number of 24-bit instructions to read
(max. of 32768).
0h
MSb of 24-bit source address.
Least Significant 16 bits of 24-bit
source address.
Addr_LS
data
8 7
N
Description
format
Length
Addr_MSB
described
Advance Information
0
in
5.2.9
The PROGC command instructs the programming
executive to program a single User ID register located
at the specified memory address.
After the specified data word has been programmed to
code memory, the programming executive verifies the
programmed data against the data in the command.
Expected Response (2 words):
5.2.10
The PROGD command instructs the programming
executive to program one word (16-bit) of data
EEPROM memory, starting from the 24-bit address
specified by Addr_MSB and Addr_LS.
Once one word of data EEPROM has been
programmed, the programming executive verifies the
programmed data against the data in the command.
15
Opcode
Length
Reserved
Addr_MSB
Addr_LS
Data
15
Opcode
Length
Reserved
Addr_MSB
Addr_LS
D_1
Opcode
Opcode
Field
Field
1400h
0002h
Reserved
Reserved
12 11
12 11
PROGC COMMAND
PROGD COMMAND
4h
4h
0h
MSb of 24-bit destination address.
Least Significant 16 bits of 24-bit
destination address.
8-bit data word.
Fh
4h
0h
MSB of 24-bit source address.
Least Significant 16 bits of 24-bit
source address.
16-bit data word.
Addr_LS
Addr_LS
© 2008 Microchip Technology Inc.
Data
D_1
8 7
8 7
Description
Description
Length
Length
Addr_MSB
Addr_MSB
0
0