IC PIC MCU FLASH 16K 28-SSOP

PIC24F16KA102-I/SS

Manufacturer Part NumberPIC24F16KA102-I/SS
DescriptionIC PIC MCU FLASH 16K 28-SSOP
ManufacturerMicrochip Technology
SeriesPIC® XLP™ 24F
PIC24F16KA102-I/SS datasheets
 


Specifications of PIC24F16KA102-I/SS

Program Memory TypeFLASHProgram Memory Size16KB (5.5K x 24)
Package / Case28-SSOPCore ProcessorPIC
Core Size16-BitSpeed32MHz
ConnectivityI²C, IrDA, SPI, UART/USARTPeripheralsBrown-out Detect/Reset, POR, PWM, WDT
Number Of I /o24Eeprom Size512 x 8
Ram Size1.5K x 8Voltage - Supply (vcc/vdd)1.8 V ~ 3.6 V
Data ConvertersA/D 9x10bOscillator TypeInternal
Operating Temperature-40°C ~ 85°CProcessor SeriesPIC24F
CorePICData Bus Width16 bit
Data Ram Size1.5 KBInterface TypeI2C/IrDA/SPI/UART
Maximum Clock Frequency32 MHzNumber Of Programmable I/os24
Number Of Timers3Operating Supply Voltage1.8 V to 3.6 V
Maximum Operating Temperature+ 85 CMounting StyleSMD/SMT
3rd Party Development Tools52713-733, 52714-737, 53276-922, EWDSPICDevelopment Tools By SupplierPG164130, DV164035, DV244005, DV164005, DM240001
Minimum Operating Temperature- 40 COn-chip Adc9-ch x 10-bit
Lead Free Status / RoHS StatusLead free / RoHS CompliantFor Use WithMA240017 - MODULE PLUG-IN PIC24F16KA102 PIM
1
Page 1
2
Page 2
3
Page 3
4
Page 4
5
Page 5
6
Page 6
7
Page 7
8
Page 8
9
Page 9
10
Page 10
11
12
13
14
15
16
17
18
Page 1/18

Download datasheet (188Kb)Embed
Next
PIC24F16KA102 Family
Silicon Errata and Data Sheet Clarification
The PIC24F16KA102 family devices that you have
received conform functionally to the current Device Data
Sheet (DS39927B), except for the anomalies described
in this document.
The silicon issues discussed in the following pages are
for silicon revisions with the Device and Revision IDs
listed in
Table
1. The silicon issues are summarized in
Table
2.
The errata described in this document will be addressed
in future revisions of the PIC24F16KA102 family silicon.
This document summarizes all silicon
Note:
errata issues from all revisions of silicon,
previous as well as current. Only the
issues indicated in the last column of
Table 2
apply to the current silicon
revision (B0).
Data Sheet clarifications and corrections start on page 7,
following the discussion of silicon issues.
The silicon revision level can be identified using the
®
current version of MPLAB
IDE and Microchip’s
programmers, debuggers and emulation tools, which
are available at the Microchip corporate web site
(www.microchip.com).
TABLE 1:
SILICON DEVREV VALUES
Part Number
PIC24F08KA101
PIC24F08KA102
PIC24F16KA101
PIC24F16KA102
The Device IDs (DEVID and DEVREV) are located at the last two implemented addresses in program
Note 1:
memory. They are shown in hexadecimal in the format, “DEVID DEVREV”.
Refer to the “PIC24FXXKAXXX Flash Programming Specification” (DS39919) for detailed information on
2:
Device and Revision IDs for your specific device.
 2010 Microchip Technology Inc.
PIC24F16KA102 FAMILY
For example, to identify the silicon revision level using
MPLAB IDE in conjunction with MPLAB ICD 2 or
PICkit™ 3:
1.
Using the appropriate interface, connect
the
device
to
programmer/debugger or PICkit™ 3.
2.
From the main menu in MPLAB IDE, select
Configure>Select Device and then select the
target part number in the dialog box.
3.
Select
the
(Debugger>Select Tool).
4.
Perform a “Connect” operation to the device
(Debugger>Connect). Depending on the devel-
opment tool used, the part number and Device
Revision ID value appear in the Output window.
If you are unable to extract the silicon
Note:
revision level, please contact your local
Microchip sales office for assistance.
The DEVREV values for the various PIC24F16KA102
family silicon revisions are shown in
Revision ID for Silicon Revision
(1)
Device ID
A5
0B08h
0B0Ah
05h
0B01h
0B03h
the
MPLAB
ICD
2
MPLAB
hardware
tool
Table
1.
(2)
A6
A7
B0
06h
07h
08h
DS80473F-page 1

PIC24F16KA102-I/SS Summary of contents

  • Page 1

    ... Table 1. The silicon issues are summarized in Table 2. The errata described in this document will be addressed in future revisions of the PIC24F16KA102 family silicon. This document summarizes all silicon Note: errata issues from all revisions of silicon, previous as well as current. Only the issues indicated in the last column of ...

  • Page 2

    ... PIC24F16KA102 FAMILY TABLE 2: SILICON ISSUE SUMMARY Item Module Feature Number CTMU — 1. Resets BOR 2. Core ICSP™ 3. Core Deep Sleep 4. Memory Code 5. Protection Comparator — 6. SPI Enhanced 7. Buffer mode I/O Ports PORTA and 8. PORTB I/O Ports PORTA and 9. PORTB Core Low-Voltage 10 ...

  • Page 3

    ... Affected Silicon Revisions  2010 Microchip Technology Inc. PIC24F16KA102 FAMILY 3. Module: Core (ICSP™) Under certain circumstances, a PGC/PGD pin pair may not function to enter ICSP Program- ming mode. This has been observed only when both the following conditions are met: a) Pin, (FPOR<5> = 1), and b) ...

  • Page 4

    ... PIC24F16KA102 FAMILY 5. Module: Memory (Code Protection) When any boot segment is enabled in program memory (FBS<3:1> ≠ 111 not possible to jump directly from the Reset vector to any address in the boot segment. Work around Point the Reset vector to an address in the general segment. From there possible to jump into the boot segment ...

  • Page 5

    ... PIC24F16KA102 FAMILY 9. Module: I/O Ports (PORTA and PORTB) This issue occurs in PIC24FXXKA101 Note: (20-pin) devices only. On 20-pin devices of the PIC24F16KA102 family, the functions associated with port pins, RB2 and RA2, may be interconnected in unexpected ways. PORTB pin, RB2, may not operate correctly as a digital I/O if the analog input on PORTA pin, RA2 (AN4), is enabled (AD1PCFG< ...

  • Page 6

    ... PIC24F16KA102 FAMILY 11. Module: Comparator (I/O Pins) Certain I/O pins may not function correctly as digital inputs or outputs after specific comparator outputs have been enabled with the COE bit (CMxCON<14> = 1). These are: • RB14 (with Comparator 1) • RA6 (with Comparator 2) This condition may continue even after the com- parator in question has been disabled, using the corresponding CON bit (CMxCON< ...

  • Page 7

    ... The ADC conversion result never decreases with an increase in the input voltage and has no missing codes. 2: Measurements taken with external V  2010 Microchip Technology Inc. PIC24F16KA102 FAMILY 2. Module: Electrical Specifications (AC Specifications) In Table 29-25, the maximum Differential Nonlinearity specification for the A/D module (parameter AD22b) has changed ...

  • Page 8

    ... PIC24F16KA102 FAMILY 3. Module: Electrical Specifications (DC Specifications) In Table 29-6, the values for parameters, DC20d and DC20e (I for Deep Sleep), have changed. DD The corrected values are shown (changes in bold). TABLE 29-6: DC CHARACTERISTICS: OPERATING CURRENT (I DC CHARACTERISTICS (1) Parameter No. Typical Max I Current DD DC20 330 DS20a ...

  • Page 9

    ... ADCS<5:0>: A/D Conversion Clock Select bits 111111 = 64 • 111110 = 63 • · · · 000001 = 2 • 000000 = T CY  2010 Microchip Technology Inc. PIC24F16KA102 FAMILY below R/W-0 R/W-0 R/W-0 SAMC4 SAMC3 SAMC2 R/W-0 R/W-0 R/W-0 ADCS4 ADCS3 ADCS2 U = Unimplemented bit, read as ‘0’ ...

  • Page 10

    ... PIC24F16KA102 FAMILY 7. Module: Comparators The descriptions given for the CMIDL bit (CMSTAT<15>) are incorrect. The correct descriptions are shown below (changes in bold). REGISTER 23-2: CMSTAT: COMPARATOR MODULE STATUS REGISTER R/W-0 U-0 U-0 CMIDL — — bit 15 U-0 U-0 U-0 — — ...

  • Page 11

    ... MCLR/V AN0/V REF AN1/V REF PGD1/AN2/C1IND/C2INB/U2TX/CN4/RB0 PGC1/AN3/C1INC/C2INA/U2RX/CN5/RB1 AN4/C1INB/C2IND/U1RX/CN6/RB2 AN5/C1INA/C2INC/CN7/RB3 OSCI/CLKI/CN30/RA2 OSCO/CLKO/CN29/RA3 SOSCI/U2RTS/U2BCLK/CN1/RB4 SOSCO/T1CK/U2CTS/CN0/RA4 PGD3/SDA1/CN27/RB5 FIGURE 2: PIN DIAGRAMS (CONTINUED) 20-Pin QFN PGD1/AN2/C1IND/C2INB/U2TX/CN4/RB0 PGC1/AN3/C1INC/C2INA/U2RX/CN5/RB1 U1RXCN6/RB2 OSCI/CLKI/AN4/C1INB/C2IND/CN30/RA2 OSCO/CLKO/AN5/C1INA/C2INC/CN29/RA3  2010 Microchip Technology Inc. PIC24F16KA102 FAMILY /RA5 +/CN2/RA0 REFO/SS1/T2CK/T3CK/CN11/RB15 -/CN3/RA1 3 18 AN10/CV /RTCC/SDI1/OCFA/C1OUT/INT1/CN12/RB14 4 17 REF ...

  • Page 12

    ... PIC24F16KA102 FAMILY FIGURE 3: PIN DIAGRAMS (CONTINUED) 28-Pin QFN PGD1/AN2/C1IND/C2INB/U2TX/CN4/RB0 PGC1/AN3/C1INC/C2INA/U2RX/CN5/RB1 AN4/C1INB/C2IND/U1RX/CN6/RB2 AN5/C1INA/C2INC/CN7/RB3 OSCI/CLKI/CN30/RA2 OSCO/CLKO/CN29/RA3 TABLE 1-2: PIC24F16KA102 FAMILY PINOUT DESCRIPTIONS (PARTIAL REPRESENTATION) Pin Number 20-Pin 28-Pin Function 20-Pin PDIP/SSOP/ SPDIP/ QFN SOIC SSOP/SOIC AN0 AN1 AN2 AN3 AN4 AN5 AN10 17 14 ...

  • Page 13

    ... Channel 0 positive input is AN4 0011 = Channel 0 positive input is AN3 0010 = Channel 0 positive input is AN2  2010 Microchip Technology Inc. PIC24F16KA102 FAMILY In addition, the CH0SA bit field is only four bits wide, comprising AD1CHS<3:0>; CH0SA4 is not implemented. This deletion applies to all occurrences of CH0SA4, including the device memory map ...

  • Page 14

    ... PIC24F16KA102 FAMILY 10. Module: A/D Converter In Figure 22-2, the interconnect resistance shown as having a value of no more than 250W. The proper value for more than IC 250 ohms. 11. Module: Special Features (Configuration Bits) In the FDS Configuration register, the Configu- ration bits, DSLPBOR and (FDS<6,4>), have been renamed: DSBOREN and DSWDTOSC ...

  • Page 15

    ... Operating temperature A Param Sym Characteristic No. DC19 BOR Voltage on V Transition DD Note 1: LPBOR re-arms the POR circuit, but does not cause a BOR.  2010 Microchip Technology Inc. PIC24F16KA102 FAMILY Min Typ Max Units BORV = 00 — — — — BORV = 01 2.92 3 3.25 V BORV = 10 2.63 2 ...

  • Page 16

    ... PIC24F16KA102 FAMILY APPENDIX A: DOCUMENT REVISION HISTORY Rev A Document (6/2009) Initial release of this document; issued for revision A5. Includes silicon issues 1 (CTMU), 2 (Resets – BOR), 3 (Core – ICSP), 4 (Core – Deep Sleep), 5 (Memory – Code Protection), 6 (Comparator) and 7 (SPI – Enhanced Buffer Mode). Includes data sheet clarifica- tions 1 (Memory), 2 (Electrical Specifications – ...

  • Page 17

    ... PICtail, REAL ICE, rfLAB, Select Mode, Total Endurance, TSHARC, UniWinDriver, WiperLock and ZENA are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. SQTP is a service mark of Microchip Technology Incorporated in the U.S.A. All other trademarks mentioned herein are property of their respective companies. ...

  • Page 18

    ... Philippines - Manila Tel: 63-2-634-9065 Fax: 63-2-634-9069 Singapore Tel: 65-6334-8870 Fax: 65-6334-8850 Taiwan - Hsin Chu Tel: 886-3-6578-300 Fax: 886-3-6578-370 Taiwan - Kaohsiung Tel: 886-7-213-7830 Fax: 886-7-330-9305 Taiwan - Taipei Tel: 886-2-2500-6610 Fax: 886-2-2508-0102 Thailand - Bangkok Tel: 66-2-694-1351 Fax: 66-2-694-1350  2010 Microchip Technology Inc. 08/04/10 ...