LPC2468FET208,551 NXP Semiconductors, LPC2468FET208,551 Datasheet - Page 534

• Manufacturer Part Number: LPC2468FET208,551
• Description: IC ARM7 MCU FLASH 512K 208TFBGA
• Manufacturer: NXP Semiconductors
• Series: LPC2400r

Specifications of LPC2468FET208,551

• Program Memory Type: FLASH
• Program Memory Size: 512KB (512K x 8)
• Package / Case: 208-TFBGA
• Core Processor: ARM7
• Core Size: 16/32-Bit
• Speed: 72MHz
• Connectivity: CAN, EBI/EMI, Ethernet, I²C, Microwire, MMC, SPI, SSI, SSP, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, DMA, I²S, POR, PWM, WDT
• Number Of I /o: 160
• Ram Size: 98K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 1x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: LPC24
• Core: ARM7TDMI-S
• Data Bus Width: 16 bit, 32 bit
• Data Ram Size: 98 KB
• Interface Type: CAN/I2S/ISP/SSP/UART/USB
• Maximum Clock Frequency: 72 MHz
• Number Of Programmable I/os: 160
• Number Of Timers: 6
• Operating Supply Voltage: 3.3 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2, IRD-LPC2468-DEV, SAB-TFBGA208, KSK-LPC2468-PL
• Development Tools By Supplier: OM10100
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8-ch x 10-bit
• On-chip Dac: 1-ch x 10-bit
• Package: 208TFBGA
• Device Core: ARM7TDMI-S
• Family Name: LPC2000
• Maximum Speed: 72 MHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 622-1025 - KIT DEV IND REF DESIGN LPC2468622-1024 - BOARD SCKT ADAPTER FOR TFBGA208568-4358 - DISPLAY QVGA TFT FOR OM10100568-4309 - BOARD EXTENSION LPCSTICK568-4308 - EVAL LPC-STICK WITH LPC2468MCB2400U - BOARD EVAL MCB2400 + ULINK2MCB2400 - BOARD EVAL FOR NXP LPC246X SER622-1005 - USB IN-CIRCUIT PROG ARM7 LPC2K
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 568-4262; 935283234551; LPC2468FET208-S

NXP Semiconductors
8. Architecture
UM10237_4
User manual
7.6 SPI Test Status Register (SPTSR - 0xE002 0014)
7.7 SPI Interrupt Register (S0SPINT - 0xE002 001C)
Table 466: SPI Test Control Register (SPTCR - address 0xE002 0010) bit description
Note: The bits in this register are intended for functional verification only. This register
should not be used for normal operation.
This register is a replication of the SPI status register. The difference between the
registers is that a read of this register will not start the sequence of events required to
clear these status bits. A write to this register will set an interrupt if the write data for the
respective bit is a 1.
Table 467: SPI Test Status Register (SPTSR - address 0xE002 0014) bit description
This register contains the interrupt flag for the SPI0 interface.
Table 468: SPI Interrupt Register (S0SPINT - address 0xE002 001C) bit description
The block diagram of the SPI solution implemented in SPI0 interface is shown in the
Figure
Bit
0
7:1
Bit
2:0
3
4
5
6
7
Bit Symbol Description
0
7:1 -
SPI
Interrupt
Flag
Symbol
-
Test
Symbol
-
ABRT
MODF
ROVR
WCOL
SPIF
19–95.
SPI interrupt flag. Set by the SPI interface to generate an interrupt. Cleared
by writing a 1 to this bit.
Note: this bit will be set once when SPIE = 1 and at least one of SPIF and
WCOL bits is 1. However, only when the SPI Interrupt bit is set and SPI0
Interrupt is enabled in the VIC, SPI based interrupt can be processed by
interrupt handling software.
Reserved, user software should not write ones to reserved bits. The value
read from a reserved bit is not defined.
Description
Reserved, user software should not write ones to reserved bits.
The value read from a reserved bit is not defined.
SPI test mode. When 0, the SPI operates normally. When 1,
SCK will always be on, independent of master mode select, and
data availability setting.
Description
Reserved, user software should not write ones to reserved bits.
The value read from a reserved bit is not defined.
Slave abort.
Mode fault.
Read overrun.
Write collision.
SPI transfer complete flag.
Rev. 04 — 26 August 2009
Chapter 19: LPC24XX SPI
UM10237
© NXP B.V. 2009. All rights reserved.
0
Reset Value
NA
0
Reset Value
NA
0
0
0
0
534 of 792
Reset
Value
0
NA