LPC2468FET208,551 NXP Semiconductors, LPC2468FET208,551 Datasheet - Page 665

• Manufacturer Part Number: LPC2468FET208,551
• Description: IC ARM7 MCU FLASH 512K 208TFBGA
• Manufacturer: NXP Semiconductors
• Series: LPC2400r

Specifications of LPC2468FET208,551

• Program Memory Type: FLASH
• Program Memory Size: 512KB (512K x 8)
• Package / Case: 208-TFBGA
• Core Processor: ARM7
• Core Size: 16/32-Bit
• Speed: 72MHz
• Connectivity: CAN, EBI/EMI, Ethernet, I²C, Microwire, MMC, SPI, SSI, SSP, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, DMA, I²S, POR, PWM, WDT
• Number Of I /o: 160
• Ram Size: 98K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 1x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: LPC24
• Core: ARM7TDMI-S
• Data Bus Width: 16 bit, 32 bit
• Data Ram Size: 98 KB
• Interface Type: CAN/I2S/ISP/SSP/UART/USB
• Maximum Clock Frequency: 72 MHz
• Number Of Programmable I/os: 160
• Number Of Timers: 6
• Operating Supply Voltage: 3.3 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2, IRD-LPC2468-DEV, SAB-TFBGA208, KSK-LPC2468-PL
• Development Tools By Supplier: OM10100
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8-ch x 10-bit
• On-chip Dac: 1-ch x 10-bit
• Package: 208TFBGA
• Device Core: ARM7TDMI-S
• Family Name: LPC2000
• Maximum Speed: 72 MHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 622-1025 - KIT DEV IND REF DESIGN LPC2468622-1024 - BOARD SCKT ADAPTER FOR TFBGA208568-4358 - DISPLAY QVGA TFT FOR OM10100568-4309 - BOARD EXTENSION LPCSTICK568-4308 - EVAL LPC-STICK WITH LPC2468MCB2400U - BOARD EVAL MCB2400 + ULINK2MCB2400 - BOARD EVAL FOR NXP LPC246X SER622-1005 - USB IN-CIRCUIT PROG ARM7 LPC2K
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 568-4262; 935283234551; LPC2468FET208-S

NXP Semiconductors
UM10237_4
User manual
4.4 Watchdog Timer Value Register (WDTV - 0xE000 000C)
4.5 Watchdog Timer Clock Source Selection Register (WDCLKSEL -
errors. After writing 0xAA to WDFEED, access to any Watchdog register other than writing
0x55 to WDFEED causes an immediate reset/interrupt when the Watchdog is enabled.
The reset will be generated during the second PCLK following an incorrect access to a
Watchdog register during a feed sequence.
Interrupts should be disabled during the feed sequence. An abort condition will occur if an
interrupt happens during the feed sequence.
Table 588: Watchdog Feed Register (WDFEED - address 0xE000 0008) bit description
The WDTV register is used to read the current value of Watchdog timer.
When reading the value of the 32 bit timer, the lock and synchronization procedure takes
up to 6 WDCLK cycles plus 6 PCLK cycles, so the value of WDTV is older than the actual
value of the timer when it's being read by the CPU.
Table 589: Watchdog Timer Value register (WDTV - address 0xE000 000C) bit description
0xE000 0010)
This register allows selecting the clock source for the Watchdog timer. The possibilities are: the
Internal RC oscillator (IRC), the RTC oscillator, and the APB peripheral clock (pclk). The function of
bits in WDCLKSEL are shown in
Table 590: Watchdog Timer Clock Source Selection register (WDCLKSEL - address
Bit
7:0
Bit
31:0
Bit
1:0
31:2 -
Symbol Value Description
WDSEL
Symbol
Feed
Symbol
Count
0xE000 0010) bit description
00
01
10
11
-
Description
Feed value should be 0xAA followed by 0x55.
Description
Counter timer value.
These bits select the clock source for the Watchdog timer as
described below.
Warning: Improper setting of this value may result in incorrect
operation of the Watchdog timer, which could adversely affect
system operation.
Selects the Internal RC oscillator as the Watchdog clock source
(default).
Selects the APB peripheral clock (PCLK) as the Watchdog clock
source.
Selects the RTC oscillator as the Watchdog clock source.
Reserved
Reserved, user software should not write ones to reserved bits.
The value read from a reserved bit is not defined.
Rev. 04 — 26 August 2009
Table 27–590
Chapter 27: LPC24XX WatchDog Timer (WDT)
.
UM10237
© NXP B.V. 2009. All rights reserved.
NA
0x0000 00FF
Reset Value
Reset Value
665 of 792
Reset
Value
0
NA