STM8S105S4T6C STMicroelectronics, STM8S105S4T6C Datasheet - Page 119

• Manufacturer Part Number: STM8S105S4T6C
• Description: MCU 16KB FLASH MEM 16MHZ 44LQFP
• Manufacturer: STMicroelectronics
• Series: STM8Sr

Specifications of STM8S105S4T6C

• Core Processor: STM8
• Core Size: 8-Bit
• Speed: 16MHz
• Connectivity: I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 34
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 2.95 V ~ 5.5 V
• Data Converters: A/D 9x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 44-LQFP
• Processor Series: STM8S10x
• Core: STM8
• Data Bus Width: 8 bit
• Data Ram Size: 2 KB
• Interface Type: I2C, SPI, UART
• Maximum Clock Frequency: 16 MHz
• Number Of Programmable I/os: 34
• Number Of Timers: 8
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWSTM8
• Development Tools By Supplier: STICE-SYS001
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 9 Channel
• For Use With: 497-10040 - EVAL KIT STM8S DISCOVERY497-10593 - KIT STARTER FOR STM8S207/8 SER497-5046 - KIT TOOL FOR ST7/UPSD/STR7 MCU
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 497-8819

STM8S105xx
OPT3 watchdog
OPT4 wakeup
AFR5
(check only one option)
AFR6
(check only one option)
AFR7
(check only one option)
WWDG_HALT
(check only one option)
WWDG_HW
(check only one option)
IWDG_HW
(check only one option)
LSI_EN
(check only one option)
HSITRIM
(check only one option)
PRSC
(check only one option)
CKAWUSEL
(check only one option)
[ ] 0: Remapping option inactive. Default alternate functions used.
Refer to pinout description.
[ ] 1: Port B3 alternate function = TIM1_ETR, port B2 alternate
function = TIM1_NCC3, port B1 alternate function = TIM1_CH2N,
port B0 alternate function = TIM1_CH1N.
[ ] 0: Remapping option inactive. Default alternate functions used.
Refer to pinout description
[ ] 1: Port B5 alternate function = I2C_SDA, port B4 alternate
function = I2C_SCL.
[ ] 0: Remapping option inactive. Default alternate functions used.
Refer to pinout description.
[ ] 1: Port D4 alternate function = BEEP.
DocID14771 Rev 10
[ ] for 16 MHz to 128 kHz prescaler.
[ ] for 8 MHz to 128 kHz prescaler.
[ ] for 4 MHz to 128 kHz prescaler.
[ ] 0: LSI clock source selected for AWU.
[ ] 1: HSE clock with prescaler selected as clock source
for AWU.
[ ] 0: No reset generated on halt if WWDG active.
[ ] 1: Reset generated on halt if WWDG active.
[ ] 0: WWDG activated by software.
[ ] 1: WWDG activated by hardware.
[ ] 0: IWDG activated by software.
[ ] 1: IWDG activated by hardware.
[ ] 0: LSI clock is not available as CPU clock source.
[ ] 1: LSI clock is available as CPU clock source.
[ ] 0: 3-bit trimming supported in CLK_HSITRIMR
register.
[ ] 1: 4-bit trimming supported in CLK_HSITRIMR
register.
Ordering information
119/127