R5F21334CNFP#U0 Renesas Electronics America, R5F21334CNFP#U0 Datasheet - Page 172

• Manufacturer Part Number: R5F21334CNFP#U0
• Description: MCU 1KB FLASH 16K ROM 32-LQFP
• Manufacturer: Renesas Electronics America
• Series: R8C/3x/33Cr

Specifications of R5F21334CNFP#U0

• Core Processor: R8C
• Core Size: 16/32-Bit
• Speed: 20MHz
• Connectivity: I²C, LIN, SIO, SSU, UART/USART
• Peripherals: POR, PWM, Voltage Detect, WDT
• Number Of I /o: 27
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: FLASH
• Ram Size: 1.5K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 12x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 85°C
• Package / Case: 32-LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

R8C/33C Group
REJ09B0570-0100 Rev.1.00 Dec. 14, 2009
Page 142 of 589
Figure 11.4
11.3.5
11.3.6
Table 11.5
Watchdog timer, oscillation stop detection, voltage monitor 1, voltage
monitor 2, address break
Software, address match, single-step
Figure 11.4 shows the Interrupt Response Time. The interrupt response time is the period from when an
interrupt request is generated until the first instruction in the interrupt routine is executed. The interrupt
response time includes the period from when an interrupt request is generated until the currently executing
instruction is completed (refer to (a) in Figure 11.4) and the period required for executing the interrupt sequence
(20 cycles, refer to (b) in Figure 11.4).
When a maskable interrupt request is acknowledged, the interrupt priority level of the acknowledged interrupt
is set in the IPL.
When a software interrupt or special interrupt request is acknowledged, the level listed in Table 11.5 is set in
the IPL.
Table 11.5 lists the IPL Value When Software or Special Interrupt is Acknowledged.
Interrupt request generation
Interrupt Response Time
IPL Change when Interrupt Request is Acknowledged
IPL Value When Software or Special Interrupt is Acknowledged
Interrupt Response Time
Interrupt Source without Interrupt Priority Level
(a) The period from when an interrupt request is generated until the currently executing instruction is completed.
(b) 21 cycles for address match and single-step interrupts.
The length of time varies depending on the instruction being executed. The DIVX instruction requires
the longest time, 30 cycles (no wait states if the divisor is a register).
Instruction
(a)
Interrupt response time
Interrupt request acknowledgement
Interrupt sequence
20 cycles (b)
interrupt routine
Instruction in
Time
Value Set in IPL
Not changed
7
11. Interrupts