R5F21334CNFP#U0 Renesas Electronics America, R5F21334CNFP#U0 Datasheet - Page 205

MCU 1KB FLASH 16K ROM 32-LQFP

R5F21334CNFP#U0

Manufacturer Part Number
R5F21334CNFP#U0
Description
MCU 1KB FLASH 16K ROM 32-LQFP
Manufacturer
Renesas Electronics America
Series
R8C/3x/33Cr
Datasheet

Specifications of R5F21334CNFP#U0

Core Processor
R8C
Core Size
16/32-Bit
Speed
20MHz
Connectivity
I²C, LIN, SIO, SSU, UART/USART
Peripherals
POR, PWM, Voltage Detect, WDT
Number Of I /o
27
Program Memory Size
16KB (16K x 8)
Program Memory Type
FLASH
Ram Size
1.5K x 8
Voltage - Supply (vcc/vdd)
1.8 V ~ 5.5 V
Data Converters
A/D 12x10b; D/A 2x8b
Oscillator Type
Internal
Operating Temperature
-20°C ~ 85°C
Package / Case
32-LQFP
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Eeprom Size
-

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
R5F21334CNFP#U0
Manufacturer:
Renesas Electronics America
Quantity:
135
Company:
Part Number:
R5F21334CNFP#U0R5F21334CNFP#V2
Manufacturer:
RENESAS
Quantity:
5 600
Company:
Part Number:
R5F21334CNFP#U0R5F21334CNFP#V2
Manufacturer:
Renesas Electronics America
Quantity:
10 000
Company:
Part Number:
R5F21334CNFP#U0R5F21334CNFP#X6
Manufacturer:
Renesas Electronics America
Quantity:
10 000
R8C/33C Group
REJ09B0570-0100 Rev.1.00 Dec. 14, 2009
Page 175 of 589
14.3.3
Table 14.3
Notes:
Count source
Count operation
Period
Watchdog timer
initialization conditions
Count start conditions
Count stop condition
Operation at underflow
Registers, bits
The count source for the watchdog timer is the low-speed on-chip oscillator clock for the watchdog timer when
count source protection mode is enabled. If the CPU clock stops when a program is out of control, the clock can
still be supplied to the watchdog timer.
Table 14.3 lists the Watchdog Timer Specifications (Count Source Protection Mode Enabled).
1. The WDTON bit cannot be changed by a program. To set this bit, write 0 to bit 0 of address 0FFFFh
2. Even if 0 is written to the CSPROINI bit in the OFS register, the CSPRO bit is set to 1. The
3. Write the WDTR register during the count operation of the watchdog timer.
with a flash programmer.
CSPROINI bit cannot be changed by a program. To set this bit, write 0 to bit 7 of address 0FFFFh
with a flash programmer.
Count Source Protection Mode Enabled
Item
Watchdog Timer Specifications (Count Source Protection Mode Enabled)
Low-speed on-chip oscillator clock
Decrement
m: Value set by bits WDTUFS0 and WDTUFS1 in the OFS2 register
Example:
The period is approximately 8.2 ms when:
- The on-chip oscillator clock for the watchdog timer is set to 125 kHz.
- Bits WDTUFS1 to WDTUFS0 are set to 00b (03FFh).
• Reset
• Write 00h and then FFh to the WDTR register.
• Underflow
The operation of the watchdog timer after a reset is selected by
the WDTON bit
• When the WDTON bit is set to 1 (watchdog timer is stopped after reset).
• When the WDTON bit is set to 0 (watchdog timer starts automatically after
None (Count does not stop even in wait mode and stop mode once it starts.)
Watchdog timer reset (Refer to 5.5 Watchdog Timer Reset. )
• When the CSPPRO bit in the CSPR register is set to 1 (count source
Low-speed on-chip oscillator clock for the watchdog timer
The watchdog timer and prescaler are stopped after a reset and
start counting when the WDTS register is written to.
reset).
The watchdog timer and prescaler start counting automatically after a reset.
protection mode enabled)
- The low-speed on-chip oscillator for the watchdog timer is on.
- The PM12 bit in the PM1 register is set to 1 (watchdog timer reset when the
watchdog timer underflows).
Count value of watchdog timer (m)
(1)
in the OFS register (address 0FFFFh).
(2)
, the following are set automatically:
Specification
(3)
14. Watchdog Timer

Related parts for R5F21334CNFP#U0