R5F21334CNFP#U0 Renesas Electronics America, R5F21334CNFP#U0 Datasheet - Page 285

• Manufacturer Part Number: R5F21334CNFP#U0
• Description: MCU 1KB FLASH 16K ROM 32-LQFP
• Manufacturer: Renesas Electronics America
• Series: R8C/3x/33Cr

Specifications of R5F21334CNFP#U0

• Core Processor: R8C
• Core Size: 16/32-Bit
• Speed: 20MHz
• Connectivity: I²C, LIN, SIO, SSU, UART/USART
• Peripherals: POR, PWM, Voltage Detect, WDT
• Number Of I /o: 27
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: FLASH
• Ram Size: 1.5K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 12x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 85°C
• Package / Case: 32-LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

R8C/33C Group
REJ09B0570-0100 Rev.1.00 Dec. 14, 2009
Page 255 of 589
19.4
Table 19.7
j = A, B, C, or D
Count source
Count operation
Count period
Count start condition
Count stop condition
Interrupt request generation
timing
TRCIOA, TRCIOB, TRCIOC,
and TRCIOD pin functions
INT0 pin function
Read from timer
Write to timer
Select functions
This function measures the width or period of an external signal. An external signal input to the TRCIOj (j = A, B,
C, or D) pin acts as a trigger for transferring the contents of the TRC register (counter) to the TRCGRj register
(input capture). The input capture function, or any other mode or function, can be selected for each individual pin.
The TRCGRA register can also select fOCO128 signal as input-capture trigger input.
Table 19.7 lists the Specifications of Input Capture Function, Figure 19.7 shows a Block Diagram of Input Capture
Function, Table 19.8 lists the Functions of TRCGRj Register when Using Input Capture Function, and Figure 19.8
shows an Operating Example of Input Capture Function.
Timer Mode (Input Capture Function)
Item
Specifications of Input Capture Function
f1, f2, f4, f8, f32, fOCO40M, fOCO-F
• The CCLR bit in the TRCCR1 register is set to 0 (free running operation):
1 (count starts) is written to the TSTART bit in the TRCMR register.
0 (count stops) is written to the TSTART bit in the TRCMR register.
Programmable I/O port or INT0 interrupt input
The count value can be read by reading TRC register.
External signal (rising edge) input to TRCCLK pin
Increment
• The CCLR bit in the TRCCR1 register is set to 1 (TRC register set to
The TRC register retains a value before count stops.
• Input capture (valid edge of TRCIOj input or fOCO128 signal edge)
• The TRC register overflows.
Programmable I/O port or input capture input (selectable individually for
each pin)
The TRC register can be written to.
• Input capture input pin selection
• Input capture input valid edge selection
• Buffer operation (Refer to 19.3.2 Buffer Operation .)
• Digital filter (Refer to 19.3.3 Digital Filter .)
• Timing for setting the TRC register to 0000h
• Input-capture trigger selected
1/fk × 65,536
fk: Count source frequency
0000h at TRCGRA compare match):
1/fk × (n + 1)
n: TRCGRA register setting value
One or more of pins TRCIOA, TRCIOB, TRCIOC, and TRCIOD
Rising edge, falling edge, or both rising and falling edges
Overflow or input capture
fOCO128 can be selected for input-capture trigger input of the
TRCGRA register.
Specification
19. Timer RC