R5F21346CNFP#U0 Renesas Electronics America, R5F21346CNFP#U0 Datasheet - Page 529

• Manufacturer Part Number: R5F21346CNFP#U0
• Description: MCU 1KB FLASH 32K ROM 48-LQFP
• Manufacturer: Renesas Electronics America
• Series: R8C/3x/34Cr

Specifications of R5F21346CNFP#U0

• Core Processor: R8C
• Core Size: 16/32-Bit
• Speed: 20MHz
• Connectivity: I²C, LIN, SIO, SSU, UART/USART
• Peripherals: POR, PWM, Voltage Detect, WDT
• Number Of I /o: 43
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 2.5K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 12x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 85°C
• Package / Case: 48-LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

R8C/34C Group
REJ09B0586-0100 Rev.1.00 Jan 13, 2010
Page 496 of 723
Figure 23.20
23.6.2
(1)
(2)
(3)
(4)
(5)
Figure 23.20 shows a Sample Flowchart of Multiprocessor Data Reception. When the MPIE bit in the U2SMR5
register is set to 1, communication data is ignored until data in which the multiprocessor bit is 1 is received.
Communication data with a 1 multiprocessor bit added is transferred to the U2RB register as receive data. At
this time, a reception complete interrupt request is generated. Other operations are the same as in universal
asynchronous receiver/transmitter mode (UART mode). Figure 23.21 shows a Receive Operation Example
during Multiprocessor Communication (with 8-Bit Data/Multiprocessor Bit/One-Stop Bit).
Read the RI bit in the U2C1 register
Read the RI bit in the U2C1 register
Multiprocessor Reception
in the U2SMR5 register to 1
in the receive shift register
in the U2C1 register to 0
Sample Flowchart of Multiprocessor Data Reception
in the U2RB register
Read receive data
Set the MPIE bit
data reception?
Own station ID?
Set the RE bit
Read data
Continue
RI = 1?
RI = 1?
Start
End
Yes
Yes
Yes
No
Yes
No
No
No
(1) Set the MPIE bit in the U2SMR5 register to 1.
(2) When the MPRB bit is detected to be 1, the
(3) When the data matches the own station ID, the
(4) Read the U2C1 register to confirm that the RI
(5) To discontinue reception, set the RE bit in the
To continue reception, restart the procedure
MPIE bit is set to 0 and a reception complete
interrupt request can be generated.
Read the U2C1 register to confirm that the RI
bit is set to 1. If the RI bit is 1, read data in the
receive shift register and compare the data with
its own station ID. Reading data in the U2RB
register sets the RI bit to 0 automatically.
next data reception starts. When the data does
not match the ID, set the MPIE bit to 1 and the
MCU enters the idle state.
bit is set to 1. Then read data in the receive
shift register.
U2C0 register to 0 to complete reception.
from step (1).
23. Serial Interface (UART2)