MC9S08GT60CFD Freescale Semiconductor, MC9S08GT60CFD Datasheet - Page 114

no-image

MC9S08GT60CFD

Manufacturer Part Number
MC9S08GT60CFD
Description
MCU 8BIT 60K FLASH 48-QFN
Manufacturer
Freescale Semiconductor
Series
HCS08r
Datasheet

Specifications of MC9S08GT60CFD

Core Processor
HCS08
Core Size
8-Bit
Speed
40MHz
Connectivity
I²C, SCI, SPI
Peripherals
LVD, POR, PWM, WDT
Number Of I /o
39
Program Memory Size
60KB (60K x 8)
Program Memory Type
FLASH
Ram Size
4K x 8
Voltage - Supply (vcc/vdd)
1.8 V ~ 3.6 V
Data Converters
A/D 8x10b
Oscillator Type
Internal
Operating Temperature
-40°C ~ 85°C
Package / Case
48-QFN Exposed Pad
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Eeprom Size
-

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
MC9S08GT60CFDE
Manufacturer:
ON
Quantity:
130
Part Number:
MC9S08GT60CFDE
Manufacturer:
FREESCALE
Quantity:
1 831
Part Number:
MC9S08GT60CFDE
Manufacturer:
FREESCALE
Quantity:
20 000
Internal Clock Generator (ICG) Module
ICGC2 = $30 (%00110000)
ICGS1 = $xx
ICGS2 = $xx
ICGFLTLU/L = $xx
ICGTRM
7.4.4
In this example, the FLL will be used (in FEI mode) to multiply the internal 243 kHz (approximate)
reference clock up to 10.8 MHz to achieve 5.4 MHz bus frequency. This system will also use the trim
function to fine tune the frequency based on an external reference signal.
After the MCU is released from reset, the ICG is in self-clocked mode (SCM) and supplies approximately
8 MHz on ICGOUT which corresponds to a 4 MHz bus frequency (f
114
Bit 7
Bit 6:4 MFD
Bit 3
Bit 2:0 RFD
This is read only except for clearing interrupt flag
This is read only. Should read DCOS before performing any time critical tasks
Not used in this example
Not used in this example
Example #3: No External Crystal Connection, 5.4 MHz Bus
Frequency
LOLRE
LOCRE
Figure 7-9. ICG Initialization and Stop Recovery for Example #2
0
011 Sets the MFD multiplication factor to 10
0
000 Sets the RFD division factor to ÷1
RESET, STOP1, OR STOP2
FLL LOCK STATUS
RECOVERY FROM
INITIALIZE ICG
ICG1 = $7A
Generates an interrupt request on loss of lock
Generates an interrupt request on loss of clock
ICG2 = $30
CONTINUE
LOCK = 1?
CHECK
MC9S08GB/GT Data Sheet, Rev. 2.3
YES
NO
SOURCE (f
SERVICE INTERRUPT
FLL LOCK STATUS
FROM STOP3
RECOVERY
CONTINUE
LOCK = 1?
CHECK
Bus
YES
= 4 MHz)
Bus
).
NO
Freescale Semiconductor

Related parts for MC9S08GT60CFD