MC9S08GT60CFD Freescale Semiconductor, MC9S08GT60CFD Datasheet - Page 227

• Manufacturer Part Number: MC9S08GT60CFD
• Description: MCU 8BIT 60K FLASH 48-QFN
• Manufacturer: Freescale Semiconductor
• Series: HCS08r

Specifications of MC9S08GT60CFD

• Core Processor: HCS08
• Core Size: 8-Bit
• Speed: 40MHz
• Connectivity: I²C, SCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 39
• Program Memory Size: 60KB (60K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.6 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 48-QFN Exposed Pad
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

There are two other forms of error which are not specified which can also affect ATD accuracy. These are:
Freescale Semiconductor
•
•
•
•
•
Full scale error (E
and the ideal transition to that code. Normally, it is defined as the difference between the actual and
ideal transition to code $3FF, but in some cases the last transition may be to a lower code. The ideal
transition to any code is:
Total unadjusted error (E
and the ideal straight-line transfer function. An alternate definition (with the same result) is the
difference between the actual transfer function and the ideal straight-line transfer function. This
measure of error includes inherent quantization error and all forms of circuit error (INL, DNL,
zero-scale, and full-scale) except input leakage error, which is not due to the ATD.
Input leakage error (E
the ideal transition to that code that is the result of input leakage across the real portion of the
impedance of the network that drives the analog input. This error is a system-observable error
which is not inherent to the ATD, so it is not added to total error. This error is:
Sampling error (E
Noise error (E
(noise source capacitively coupled directly on the signal) or power supply (V
and V
internal sources can be reduced (and specified operation achieved) by operating the ATD
conversion in wait mode and ceasing all IO activity. Reducing the error due to external sources is
dependent on system activity and board layout.
SS
) noise interfering with the ATD’s ability to resolve the input accurately. The error due to
N
Ideal Transition V =
) — The error due to noise on V
FS
S
) — The error due to inadequate time to charge the ATD circuitry
) — This is the difference between the transition voltage to the last valid code
IL
) — This is the error between the transition voltage to the current code and
TU
E
IL
) — This is the difference between the transition voltage to a given code
(in V) = input leakage * R
MC9S08GB/GT Data Sheet, Rev. 2.3
(Current Code - 1/2)
2
N
AIN
, V
AS
REFH
*(V
, or V
REFH
REFL
– V
due to either direct coupling
REFL
)
DDAD
Functional Description
, V
SSAD
Eqn. 14-8
Eqn. 14-9
, V
DD
227
,