MC68HC11E1CFNE3R Freescale Semiconductor, MC68HC11E1CFNE3R Datasheet - Page 85

MCU 8-BIT 512 RAM 3MHZ 52-PLCC

MC68HC11E1CFNE3R

Manufacturer Part Number
MC68HC11E1CFNE3R
Description
MCU 8-BIT 512 RAM 3MHZ 52-PLCC
Manufacturer
Freescale Semiconductor
Series
HC11r
Datasheet

Specifications of MC68HC11E1CFNE3R

Core Processor
HC11
Core Size
8-Bit
Speed
3MHz
Connectivity
SCI, SPI
Peripherals
POR, WDT
Number Of I /o
38
Program Memory Type
ROMless
Eeprom Size
512 x 8
Ram Size
512 x 8
Voltage - Supply (vcc/vdd)
4.5 V ~ 5.5 V
Data Converters
A/D 8x8b
Oscillator Type
Internal
Operating Temperature
-40°C ~ 85°C
Package / Case
52-PLCC
Processor Series
HC11E
Core
HC11
Data Bus Width
8 bit
Data Ram Size
512 B
Interface Type
SCI, SPI
Maximum Clock Frequency
3 MHz
Number Of Programmable I/os
38
Number Of Timers
8
Maximum Operating Temperature
+ 85 C
Mounting Style
SMD/SMT
Minimum Operating Temperature
- 40 C
On-chip Adc
8 bit, 8 Channel
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Program Memory Size
-
Lead Free Status / Rohs Status
 Details

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
MC68HC11E1CFNE3R
Manufacturer:
ON
Quantity:
5 510
Part Number:
MC68HC11E1CFNE3R
Manufacturer:
PERICOM
Quantity:
5 510
Part Number:
MC68HC11E1CFNE3R
Manufacturer:
Freescale Semiconductor
Quantity:
10 000
5.3.9 Analog-to-Digital (A/D) Converter
The analog-to-digital (A/D) converter configuration is indeterminate after reset. The ADPU bit is cleared
by reset, which disables the A/D system. The conversion complete flag is indeterminate.
5.3.10 System
The EEPROM programming controls are disabled, so the memory system is configured for normal read
operation. PSEL[3:0] are initialized with the value %0110, causing the external IRQ pin to have the
highest I-bit interrupt priority. The IRQ pin is configured for level-sensitive operation (for wired-OR
systems). The RBOOT, SMOD, and MDA bits in the HPRIO register reflect the status of the MODB and
MODA inputs at the rising edge of reset. MODA and MODB inputs select one of the four operating modes.
After reset, writing SMOD and MDA in special modes causes the MCU to change operating modes. Refer
to the description of HPRIO register in
description of SMOD and MDA. The DLY control bit is set to specify that an oscillator startup delay is
imposed upon recovery from stop mode. The clock monitor system is disabled because CME is cleared.
5.4 Reset and Interrupt Priority
Resets and interrupts have a hardware priority that determines which reset or interrupt is serviced first
when simultaneous requests occur. Any maskable interrupt can be given priority over other maskable
interrupts.
The first six interrupt sources are not maskable. The priority arrangement for these sources is:
The maskable interrupt sources have this priority arrangement:
Freescale Semiconductor
10. Timer input capture 4/output compare 5
11. Timer overflow
12. Pulse accumulator overflow
13. Pulse accumulator input edge
14. SPI transfer complete
15. SCI system (refer to
1. POR or RESET pin
2. Clock monitor reset
3. COP watchdog reset
4. XIRQ interrupt
5. Illegal opcode interrupt
6. Software interrupt (SWI)
1. IRQ
2. Real-time interrupt
3. Timer input capture 1
4. Timer input capture 2
5. Timer input capture 3
6. Timer output compare 1
7. Timer output compare 2
8. Timer output compare 3
9. Timer output compare 4
Figure
5-7)
M68HC11E Family Data Sheet, Rev. 5.1
Chapter 2 Operating Modes and On-Chip Memory
Reset and Interrupt Priority
for a detailed
85

Related parts for MC68HC11E1CFNE3R