C8051F023-GQR Silicon Laboratories Inc, C8051F023-GQR Datasheet - Page 238

no-image

C8051F023-GQR

Manufacturer Part Number
C8051F023-GQR
Description
IC 8051 MCU 64K FLASH 64TQFP
Manufacturer
Silicon Laboratories Inc
Series
C8051F02xr
Datasheets

Specifications of C8051F023-GQR

Core Processor
8051
Core Size
8-Bit
Speed
25MHz
Connectivity
EBI/EMI, SMBus (2-Wire/I²C), SPI, UART/USART
Peripherals
Brown-out Detect/Reset, POR, PWM, Temp Sensor, WDT
Number Of I /o
32
Program Memory Size
64KB (64K x 8)
Program Memory Type
FLASH
Ram Size
4.25K x 8
Voltage - Supply (vcc/vdd)
2.7 V ~ 3.6 V
Data Converters
A/D 8x8b, 8x10b; D/A 2x12b
Oscillator Type
Internal
Operating Temperature
-40°C ~ 85°C
Package / Case
64-TQFP, 64-VQFP
For Use With
336-1200 - DEV KIT FOR F020/F021/F022/F023
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Eeprom Size
-

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
C8051F023-GQR
Manufacturer:
Silicon Laboratories Inc
Quantity:
10 000
Part Number:
C8051F023-GQR
0
Company:
Part Number:
C8051F023-GQR
Quantity:
10
Company:
Part Number:
C8051F023-GQR
Quantity:
10
C8051F020/1/2/3
238
Bit7:
Bit6:
Bit5:
Bit4:
Bit3:
Bit2:
Bit1:
Bit0:
TF2
R/W
Bit7
TF2: Timer 2 Overflow Flag.
Set by hardware when Timer 2 overflows. When the Timer 2 interrupt is enabled, setting this bit
causes the CPU to vector to the Timer 2 interrupt service routine. This bit is not automatically cleared
by hardware and must be cleared by software. TF2 will not be set when RCLK0 and/or TCLK0 are
logic 1.
EXF2: Timer 2 External Flag.
Set by hardware when either a capture or reload is caused by a high-to-low transition on the T2EX
input pin and EXEN2 is logic 1. When the Timer 2 interrupt is enabled, setting this bit causes the
CPU to vector to the Timer 2 Interrupt service routine. This bit is not automatically cleared by hard-
ware and must be cleared by software.
RCLK0: Receive Clock Flag for UART0.
Selects which timer is used for the UART0 receive clock in modes 1 or 3.
0: Timer 1 overflows used for receive clock.
1: Timer 2 overflows used for receive clock.
TCLK0: Transmit Clock Flag for UART0.
Selects which timer is used for the UART0 transmit clock in modes 1 or 3.
0: Timer 1 overflows used for transmit clock.
1: Timer 2 overflows used for transmit clock.
EXEN2: Timer 2 External Enable.
Enables high-to-low transitions on T2EX to trigger captures or reloads when Timer 2 is not operating
in Baud Rate Generator mode.
0: High-to-low transitions on T2EX ignored.
1: High-to-low transitions on T2EX cause a capture or reload.
TR2: Timer 2 Run Control.
This bit enables/disables Timer 2.
0: Timer 2 disabled.
1: Timer 2 enabled.
C/T2: Counter/Timer Select.
0: Timer Function: Timer 2 incremented by clock defined by T2M (CKCON.5).
1: Counter Function: Timer 2 incremented by high-to-low transitions on external input pin (T2).
CP/RL2: Capture/Reload Select.
This bit selects whether Timer 2 functions in capture or auto-reload mode. EXEN2 must be logic 1 for
high-to-low transitions on T2EX to be recognized and used to trigger captures or reloads. If RCLK0
or TCLK0 is set, this bit is ignored and Timer 2 will function in auto-reload mode.
0: Auto-reload on Timer 2 overflow or high-to-low transition at T2EX (EXEN2 = 1).
1: Capture on high-to-low transition at T2EX (EXEN2 = 1).
EXF2
R/W
Bit6
Figure 22.14. T2CON: Timer 2 Control Register
RCLK0
R/W
Bit5
TCLK0
R/W
Bit4
Rev. 1.4
EXEN2
R/W
Bit3
TR2
R/W
Bit2
C/T2
R/W
Bit1
(bit addressable)
CP/RL2
R/W
Bit0
SFR Address:
00000000
Reset Value
0xC8

Related parts for C8051F023-GQR