MC68HC711E9MFNE2 Freescale Semiconductor, MC68HC711E9MFNE2 Datasheet - Page 105

IC MCU 8BIT 512BYTES ROM 52-PLCC

MC68HC711E9MFNE2

Manufacturer Part Number
MC68HC711E9MFNE2
Description
IC MCU 8BIT 512BYTES ROM 52-PLCC
Manufacturer
Freescale Semiconductor
Series
HC11r
Datasheets

Specifications of MC68HC711E9MFNE2

Core Processor
HC11
Core Size
8-Bit
Speed
2MHz
Connectivity
SCI, SPI
Peripherals
POR, WDT
Number Of I /o
38
Program Memory Size
12KB (12K x 8)
Program Memory Type
OTP
Eeprom Size
512 x 8
Ram Size
512 x 8
Voltage - Supply (vcc/vdd)
4.5 V ~ 5.5 V
Data Converters
A/D 8x8b
Oscillator Type
Internal
Operating Temperature
-40°C ~ 125°C
Package / Case
52-PLCC
Processor Series
HC711E
Core
HC11
Data Bus Width
8 bit
Data Ram Size
512 B
Interface Type
SCI, SPI
Maximum Clock Frequency
2 MHz
Number Of Programmable I/os
38
Number Of Timers
8
Maximum Operating Temperature
+ 125 C
Mounting Style
SMD/SMT
Minimum Operating Temperature
- 40 C
On-chip Adc
8 bit
Lead Free Status / RoHS Status
Lead free / RoHS Compliant

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
MC68HC711E9MFNE2
Manufacturer:
TI
Quantity:
167
Part Number:
MC68HC711E9MFNE2
Manufacturer:
FREESCALE
Quantity:
3 381
Part Number:
MC68HC711E9MFNE2
Manufacturer:
Freescale Semiconductor
Quantity:
10 000
Chapter 7
Serial Communications Interface (SCI)
7.1 Introduction
The serial communications interface (SCI) is a universal asynchronous receiver transmitter (UART), one
of two independent serial input/output (I/O) subsystems in the M68HC11 E series of microcontrollers. It
has a standard non-return-to-zero (NRZ) format (one start bit , eight or nine data bits, and one stop bit).
Several baud rates are available. The SCI transmitter and receiver are independent, but use the same
data format and bit rate.
All members of the E series contain the same SCI, with one exception. The SCI system in the
MC68HC11E20 and MC68HC711E20 MCUs have an enhanced SCI baud rate generator. A divide-by-39
stage has been added that is enabled by an extra bit in the BAUD register. This increases the available
SCI baud rate selections. Refer to
7.2 Data Format
The serial data format requires these conditions:
Selection of the word length is controlled by the M bit of SCI control register (SCCR1).
7.3 Transmit Operation
The SCI transmitter includes a parallel transmit data register (SCDR) and a serial shift register. The
contents of the serial shift register can be written only through the SCDR. This double buffered operation
allows a character to be shifted out serially while another character is waiting in the SCDR to be
transferred into the
serial shift register. The output of the serial shift register is applied to TxD as long as transmission is in
progress or the transmit enable (TE) bit of serial communication control register 2 (SCCR2) is set. The
block diagram,
figure.
Freescale Semiconductor
1. An idle line in the high state before transmission or reception of a message
2. A start bit, logic 0, transmitted or received, that indicates the start of each character
3. Data that is transmitted and received least significant bit (LSB) first
4. A stop bit, logic 1, used to indicate the end of a frame. A frame consists of a start bit, a character
5. A break, defined as the transmission or reception of a logic 0 for some multiple number of frames
of eight or nine data bits, and a stop bit.
Figure
7-1, shows the transmit serial shift register and the buffer logic at the top of the
Figure 7-8
M68HC11E Family Data Sheet, Rev. 5.1
and
7.7.5 Baud Rate
Register.
105

Related parts for MC68HC711E9MFNE2