UPD78F1144AGB-GAH-AX Renesas Electronics America, UPD78F1144AGB-GAH-AX Datasheet - Page 37

no-image

UPD78F1144AGB-GAH-AX

Manufacturer Part Number
UPD78F1144AGB-GAH-AX
Description
MCU 16BIT 78K0R/KX3 64-LQFP
Manufacturer
Renesas Electronics America
Series
78K0R/Kx3r
Datasheet

Specifications of UPD78F1144AGB-GAH-AX

Core Processor
78K/0R
Core Size
16-Bit
Speed
20MHz
Connectivity
3-Wire SIO, I²C, LIN, UART/USART
Peripherals
DMA, LVD, POR, PWM, WDT
Number Of I /o
50
Program Memory Size
128KB (128K x 8)
Program Memory Type
FLASH
Ram Size
8K x 8
Voltage - Supply (vcc/vdd)
1.8 V ~ 5.5 V
Data Converters
A/D 8x10b
Oscillator Type
Internal
Operating Temperature
-40°C ~ 85°C
Package / Case
*
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Eeprom Size
-

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
UPD78F1144AGB-GAH-AX
Manufacturer:
RENESAS
Quantity:
1 000
Part Number:
UPD78F1144AGB-GAH-AX
Manufacturer:
Renesas Electronics America
Quantity:
10 000
2.2.3 P20 to P27 (port 2)
(1) Port mode
(2) Control mode
2.2.4 P30, P31 (port 3)
and real-time counter correction clock output.
(1) Port mode
(2) Control mode
P20 to P27 function as an 8-bit I/O port. These pins also function as A/D converter analog input.
The following operation modes can be specified in 1-bit units.
P30 and P31 function as a 2-bit I/O port. These pins also function as external interrupt request input, timer I/O,
The following operation modes can be specified in 1-bit units.
(i)
(j)
(k) RTCDIV
(l)
P20 to P27 function as an 8-bit I/O port. P20 to P27 can be set to input or output port in 1-bit units using port
mode register 2 (PM2).
P20 to P27 function as A/D converter analog input pins (ANI0 to ANI7). When using these pins as analog input
pins, see 10.7 (6) ANI0/P20 to ANI7/P27.
Caution ANI0/P20 to ANI7/P27 are set in the digital input (general-purpose port) mode after release of
P30 and P31 function as a 2-bit I/O port. P30 and P31 can be set to input or output port in 1-bit units using port
mode register 3 (PM3). Use of an on-chip pull-up resistor can be specified by pull-up resistor option register 3
(PU3).
P30 and P31 function as external interrupt request input, timer I/O, and real-time counter correction clock output.
(a) INTP3, INTP4
TO01, TO02
These are the timer output pins of 16-bit timers 01 and 02.
INTP5
This is an external interrupt request input pin for which the valid edge (rising edge, falling edge, or both rising
and falling edges) can be specified.
This is a real-time counter clock (32 kHz, divided) output pin.
RTCCL
This is a real-time counter clock (32 kHz, original oscillation) output pin.
Cautions 1. To use P10/SCK00 and P12/SO00/TxD0 as general-purpose ports, set serial
These are the external interrupt request input pins for which the valid edge (rising edge, falling edge, or both
rising and falling edges) can be specified.
reset.
2. Do not enable outputting RTCCL and RTCDIV at the same time.
communication operation setting register 00 (SCR00) to the default status (0087H).
CHAPTER 2 PIN FUNCTIONS
User’s Manual U17854EJ9V0UD
35

Related parts for UPD78F1144AGB-GAH-AX