UPD78F1144AGB-GAH-AX Renesas Electronics America, UPD78F1144AGB-GAH-AX Datasheet - Page 875

• Manufacturer Part Number: UPD78F1144AGB-GAH-AX
• Description: MCU 16BIT 78K0R/KX3 64-LQFP
• Manufacturer: Renesas Electronics America
• Series: 78K0R/Kx3r

Specifications of UPD78F1144AGB-GAH-AX

• Core Processor: 78K/0R
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: 3-Wire SIO, I²C, LIN, UART/USART
• Peripherals: DMA, LVD, POR, PWM, WDT
• Number Of I /o: 50
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

8th edition
Edition
Change of description during operation in Figure 6-42 Operation Procedure When
External Event Counter Function Is Used
Change of channel number in 6.7.3 Operation as frequency divider
Change of description during operation in Figure 6-46 Operation Procedure When
Frequency Divider Function Is Used
Change of description during operation in Figure 6-50 Operation Procedure When
Input Pulse Interval Measurement Function Is Used
Change of description during operation in Figure 6-54 Operation Procedure When
Input Signal High-/Low-Level Width Measurement Function Is Used
Change of description during operation in Figure 6-59 Operation Procedure When
PWM Function Is Used
Change of description during operation in Figure 6-64 Operation Procedure of One-
Shot Pulse Output Function
Change of description during operation in Figure 6-69 Operation Procedure When
Multiple PWM Output Function Is Used
Change of Note in Figure 7-2 Format of Peripheral Enable Register 0 (PER0)
Change of Figure 7-3 Format of Real-Time Counter Control Register 0 (RTCC0)
Change of description and Caution in Figure 7-4 Format of Real-Time Counter
Control Register 1 (RTCC1)
Addition of Caution 3 to Figure 7-5 Format of Real-Time Counter Control Register
2 (RTCC2)
Change of description in 7.3 (7) Minute count register (MIN), (8) Hour count
register (HOUR), (9) Day count register (DAY), (11) Month count register
(MONTH), and (12) Year count register (YEAR)
Change of Table 7-2 Displayed Time Digits
Addition of Caution to Figure 7-11 Format of Week Count Register (WEEK)
Change of description in 7.3 (13) Watch error correction register (SUBCUD)
Deletion of Caution in (16) Alarm week register (ALARMWW)
Addition of Notes to Figure 7-18 Procedure for Starting Operation of Real-Time
Counter
Addition of 7.4.2 Shifting to STOP mode after starting operation
Addition of 7.4.5 1 Hz output of real-time counter
Addition of 7.4.6 32.768 kHz output of real-time counter
Addition of 7.4.7 512 Hz, 16.384 kHz output of real-time counter
Addition of 7.4.8 Example of watch error correction of real-time counter
Change of Cautions 1 and 2 in Figure 8-2 Format of Watchdog Timer Enable
Register (WDTE)
Change of Caution 3 in Table 8-4 Setting Window Open Period of Watchdog
Timer
Change of description in 10.2 (9) AV
Change of Table 10-3 A/D Conversion Time Selection
Addition of Caution 4 to Figure 10-10 Format of A/D Port Configuration Register
(ADPC)
Addition of 10.5 Temperature Sensor Function (Expanded-Specification Products
(
Addition of 10.7 (2) Reducing current when A/D converter is stopped
μ
PD78F114xA) Only)
APPENDIX C REVISION HISTORY
User’s Manual U17854EJ9V0UD
REF
Description
pin
CHAPTER 6 TIMER
ARRAY UNIT
CHAPTER 7 REAL-
TIME COUNTER
CHAPTER 8
WATCHDOG TIMER
CHAPTER 10 A/D
CONVERTER
Chapter
(11/15)
873