UPD78F1146AGB-GAH-AX Renesas Electronics America, UPD78F1146AGB-GAH-AX Datasheet - Page 147

• Manufacturer Part Number: UPD78F1146AGB-GAH-AX
• Description: MCU 16BIT 78K0R/KX3 64-LQFP
• Manufacturer: Renesas Electronics America
• Series: 78K0R/Kx3r

Specifications of UPD78F1146AGB-GAH-AX

• Core Processor: 78K/0R
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: 3-Wire SIO, I²C, LIN, UART/USART
• Peripherals: DMA, LVD, POR, PWM, WDT
• Number Of I /o: 50
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 12K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

(3) Oscillation stabilization time counter status register (OSTC)
Remark The oscillation stabilization time counter starts counting in the following cases.
This is the register that indicates the count status of the X1 clock oscillation stabilization time counter.
The X1 clock oscillation stabilization time can be checked in the following case,
OSTC can be read by a 1-bit or 8-bit memory manipulation instruction.
When reset signal is generated, the STOP instruction and MSTOP (bit 7 of CSC register) = 1 clear OSTC to 00H.
• If the X1 clock starts oscillation while the internal high-speed oscillation clock or subsystem clock is being
• If the STOP mode is entered and then released while the internal high-speed oscillation clock is being used
used as the CPU clock.
as the CPU clock with the X1 clock oscillating.
X1 clock
External main system
clock
Subsystem clock
Internal high-speed
oscillation clock
• When oscillation of the X1 clock starts (EXCLK, OSCSEL = 0, 1 → MSTOP = 0)
• When the STOP mode is released
Clock
Table 5-2. Condition Before Stopping Clock Oscillation and Flag Setting
• CLS = 0 and MCS = 0
• CLS = 1
• CLS = 0
• CLS = 0 and MCS = 1
• CLS = 1
(CPU and peripheral hardware clocks operate with a clock
other than the high-speed system clock.)
(CPU and peripheral hardware clocks operate with a clock
other than the subsystem clock.)
(CPU and peripheral hardware clocks operate with a clock
other than the internal high-speed oscillator clock.)
CHAPTER 5 CLOCK GENERATOR
(Invalidating External Clock Input)
User’s Manual U17854EJ9V0UD
Condition Before Stopping Clock
MSTOP = 1
XTSTOP = 1
HIOSTOP = 1
Setting of CSC
Register Flags
145