UPD78F1146AGB-GAH-AX Renesas Electronics America, UPD78F1146AGB-GAH-AX Datasheet - Page 214

• Manufacturer Part Number: UPD78F1146AGB-GAH-AX
• Description: MCU 16BIT 78K0R/KX3 64-LQFP
• Manufacturer: Renesas Electronics America
• Series: 78K0R/Kx3r

Specifications of UPD78F1146AGB-GAH-AX

• Core Processor: 78K/0R
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: 3-Wire SIO, I²C, LIN, UART/USART
• Peripherals: DMA, LVD, POR, PWM, WDT
• Number Of I /o: 50
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 12K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

212
(3) Operation of TO0n pin in combination-operation mode (TOM0n = 1)
(b) When operation starts with TOM0n = 1 setting (Combination-operation mode (PWM output))
(a) When TOL0n setting has been changed during timer operation
Remarks 1. Set:
Remarks 1. Set:
When TOM0n = 1, the active level is determined by TOL0n setting.
When the TOL0n setting has been changed during timer operation, the setting becomes valid at the
generation timing of TO0n change condition. Rewriting TOL0n does not change the output level of TO0n.
The following figure shows the operation when the value of TOL0n has been changed during timer
operation (TOM0n = 1).
Default level, TOL0n setting
Figure 6-28. Operation when TOL0n Has Been Changed during Timer Operation
TO0n = 0, TOL0n = 0
TO0n = 1, TOL0n = 0
TO0n = 0, TOL0n = 1
TO0n = 1, TOL0n = 1
2. n = 0 to 6
2. n = 0 to 6
Internal reset signal
Internal set signal
Reset:
Reset:
Figure 6-27. TO0n Pin Output Status at PWM Output (TOM0n = 1)
(Active high)
(Active high)
(Active low)
(Active low)
TO0n pin
TOE0n
TOL0n
The output signal of TO0n pin changes from active level to inactive level.
The output signal of TO0n pin changes from active level to inactive level.
The output signal of TO0n pin changes from inactive level to active level.
The output signal of TO0n pin changes from inactive level to active level.
Port output is enabled
Dependent on TO0n setting
Hi-Z
Hi-Z
Hi-Z
Hi-Z
CHAPTER 6 TIMER ARRAY UNIT
User’s Manual U17854EJ9V0UD
Set
TO0n does not change
No change
Reset
TO0n pin transition
Dependent on TOL0n setting
Set
Set/reset signals are inverted
Reset
Set