UPD78F1146AGB-GAH-AX Renesas Electronics America, UPD78F1146AGB-GAH-AX Datasheet - Page 559

• Manufacturer Part Number: UPD78F1146AGB-GAH-AX
• Description: MCU 16BIT 78K0R/KX3 64-LQFP
• Manufacturer: Renesas Electronics America
• Series: 78K0R/Kx3r

Specifications of UPD78F1146AGB-GAH-AX

• Core Processor: 78K/0R
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: 3-Wire SIO, I²C, LIN, UART/USART
• Peripherals: DMA, LVD, POR, PWM, WDT
• Number Of I /o: 50
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 12K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

14.4 Operation of DMA Controller
14.4.1 Operation procedure
<1> The DMA controller is enabled to operate when DENn = 1. Before writing the other registers, be sure to set
<2> Set an SFR address, a RAM address, the number of times of transfer, and a transfer mode of DMA transfer
<3> The DMA controller waits for a DMA trigger when DSTn = 1. Use 81H to write with an 8-bit manipulation
<4> When a software trigger (STGn) or a start source trigger specified by IFCn3 to IFCn0 is input, a DMA transfer
<5> Transfer is completed when the number of times of transfer set by the DBCn register reaches 0, and transfer
<6> Stop the operation of the DMA controller by clearing DENn to 0 when the DMA controller is not used.
DENn to 1. Use 80H to write with an 8-bit manipulation instruction.
to the DSAn, DRAn, CBCn, and DMCn registers.
instruction.
is started.
is automatically terminated by occurrence of an interrupt (INTDMAn).
CHAPTER 14 DMA CONTROLLER
User’s Manual U17854EJ9V0UD
557