MC68HC11E1CFN3 Freescale Semiconductor, MC68HC11E1CFN3 Datasheet - Page 33

• Manufacturer Part Number: MC68HC11E1CFN3
• Description: IC MCU 3MHZ 512 EEPROM 52-PLCC
• Manufacturer: Freescale Semiconductor
• Series: HC11r

Specifications of MC68HC11E1CFN3

• Core Processor: HC11
• Core Size: 8-Bit
• Speed: 3MHz
• Connectivity: SCI, SPI
• Peripherals: POR, WDT
• Number Of I /o: 38
• Program Memory Type: ROMless
• Eeprom Size: 512 x 8
• Ram Size: 512 x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 8x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 52-PLCC
• Data Bus Width: 8 bit
• Data Ram Size: 512 B
• Interface Type: SCI, SPI
• Maximum Clock Frequency: 3 MHz
• Number Of Programmable I/os: 22
• Number Of Timers: 16 bit
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8 bit
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Program Memory Size: -
• Lead Free Status / Rohs Status: Details

2.1 Introduction
2.2 Operating Modes
2.2.1 Single-Chip Mode
2.2.2 Expanded Mode
M68HC11E Family — Rev. 5
MOTOROLA
Data Sheet — M68HC11E Family
NOTE:
This section contains information about the operating modes and the on-chip
memory for M68HC11 E-series MCUs. Except for a few minor differences,
operation is identical for all devices in the E series. Differences are noted where
necessary.
The values of the mode select inputs MODB and MODA during reset determine the
operating mode. Single-chip and expanded multiplexed are the normal modes.
Each of the two normal modes is paired with a special mode:
In single-chip mode, ports B and C and strobe pins A (STRA) and B (STRB) are
available for general-purpose parallel input/output (I/O). In this mode, all software
needed to control the MCU is contained in internal resources. If present, read-only
memory (ROM) and/or erasable, programmable read-only memory (EPROM) will
always be enabled out of reset, ensuring that the reset and interrupt vectors will be
available at locations $FFC0–$FFFF.
For the MC68HC811E2, the vector locations are the same; however, they are
contained in the 2048-byte EEPROM array.
In expanded operating mode, the MCU can access the full 64-Kbyte address
space. The space includes:
•
•
•
•
•
•
In single-chip mode only on-chip memory is available.
Expanded mode, however, allows access to external memory.
Bootstrap, a variation of the single-chip mode, is a special mode that
executes a bootloader program in an internal bootstrap ROM.
Test is a special mode that allows privileged access to internal resources.
The same on-chip memory addresses used for single-chip mode
Addresses for external peripherals and memory devices
Freescale Semiconductor, Inc.
For More Information On This Product,
Section 2. Operating Modes and On-Chip Memory
Operating Modes and On-Chip Memory
Go to: www.freescale.com
Data Sheet
33