MC68HC11E1CFN2R2 Freescale Semiconductor, MC68HC11E1CFN2R2 Datasheet - Page 163

no-image

MC68HC11E1CFN2R2

Manufacturer Part Number
MC68HC11E1CFN2R2
Description
IC MCU 512 EEPROM 2MHZ 52-PLCC
Manufacturer
Freescale Semiconductor
Series
HC11r
Datasheet

Specifications of MC68HC11E1CFN2R2

Core Processor
HC11
Core Size
8-Bit
Speed
3MHz
Connectivity
SCI, SPI
Peripherals
POR, WDT
Number Of I /o
38
Program Memory Type
ROMless
Eeprom Size
512 x 8
Ram Size
512 x 8
Voltage - Supply (vcc/vdd)
4.5 V ~ 5.5 V
Data Converters
A/D 8x8b
Oscillator Type
Internal
Operating Temperature
-40°C ~ 85°C
Package / Case
52-PLCC
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
Program Memory Size
-
Other names
MC68HC11E1CFN2TR

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
MC68HC11E1CFN2R2
Manufacturer:
Freescale Semiconductor
Quantity:
10 000
M68HC11E Family — Rev. 5
MOTOROLA
PAOVI and PAOVF — Pulse Accumulator Interrupt Enable and Overflow Flag
PAII and PAIF — Pulse Accumulator Input Edge Interrupt Enable Bit and Flag
The PAOVF status bit is set each time the pulse accumulator count rolls over
from $FF to $00. To clear this status bit, write a 1 in the corresponding data bit
position (bit 5) of the TFLG2 register. The PAOVI control bit allows configuring
the pulse accumulator overflow for polled or interrupt-driven operation and does
not affect the state of PAOVF. When PAOVI is 0, pulse accumulator overflow
interrupts are inhibited, and the system operates in a polled mode, which
requires that PAOVF be polled by user software to determine when an overflow
has occurred. When the PAOVI control bit is set, a hardware interrupt request
is generated each time PAOVF is set. Before leaving the interrupt service
routine, software must clear PAOVF by writing to the TFLG2 register.
The PAIF status bit is automatically set each time a selected edge is detected
at the PA7/PAI/OC1 pin. To clear this status bit, write to the TFLG2 register with
a 1 in the corresponding data bit position (bit 4). The PAII control bit allows
configuring the pulse accumulator input edge detect for polled or
interrupt-driven operation but does not affect setting or clearing the PAIF bit.
When PAII is 0, pulse accumulator input interrupts are inhibited, and the system
operates in a polled mode. In this mode, the PAIF bit must be polled by user
software to determine when an edge has occurred. When the PAII control bit is
set, a hardware interrupt request is generated each time PAIF is set. Before
leaving the interrupt service routine, software must clear PAIF by writing to the
TFLG2 register.
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
Timing System
Pulse Accumulator
Timing System
Data Sheet
163

Related parts for MC68HC11E1CFN2R2