MC68HC11E1CFN2R2 Freescale Semiconductor, MC68HC11E1CFN2R2 Datasheet - Page 237

• Manufacturer Part Number: MC68HC11E1CFN2R2
• Description: IC MCU 512 EEPROM 2MHZ 52-PLCC
• Manufacturer: Freescale Semiconductor
• Series: HC11r

Specifications of MC68HC11E1CFN2R2

• Core Processor: HC11
• Core Size: 8-Bit
• Speed: 3MHz
• Connectivity: SCI, SPI
• Peripherals: POR, WDT
• Number Of I /o: 38
• Program Memory Type: ROMless
• Eeprom Size: 512 x 8
• Ram Size: 512 x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 8x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 52-PLCC
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Program Memory Size: -
• Other names: MC68HC11E1CFN2TR

AN1060 — Rev. 1.0
MOTOROLA
data received for verification. No automatic verification is provided,
though the data is printed to the screen for manual verification.
Once the MCU has received this bootloaded code, the bootloader
automatically jumps to it. The small bootloaded program in turn includes
a jump to the EPROM programming routine in the boot ROM.
Refer to the previous explanation of the
for the following discussion. The host system sends the first byte to be
programmed through the COM port to the SCI of the MCU. The SCI port
on the MCU buffers one byte while receiving another byte, increasing the
throughput of the EPROM programming operation by sending the
second byte while the first is being programmed.
When the first byte has been programmed, the MCU reads the EPROM
location and sends the result back to the host system. The host then
compares what was actually programmed to what was originally sent. A
message indicating which byte is being verified is displayed in the lower
half of the screen. If there is an error, it is displayed at the top of the
screen.
As soon as the first byte is verified, the third byte is sent. In the
meantime, the MCU has already started programming the second byte.
This process of verifying and queueing a byte continues until the host
finishes sending data. If the programming is completely successful, no
error messages will have been displayed at the top of the screen.
Subroutines follow the end of the program to handle some of the
repetitive tasks. These routines are short, and the commenting in the
source code should be sufficient explanation.
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
EPROM Programming Utility
Application Note
237