MC68HC711K4CFU4 Freescale Semiconductor, MC68HC711K4CFU4 Datasheet - Page 238

• Manufacturer Part Number: MC68HC711K4CFU4
• Description: IC MCU 24K 4MHZ EEPROM 80-QFP
• Manufacturer: Freescale Semiconductor
• Series: HC11r

Specifications of MC68HC711K4CFU4

• Core Processor: HC11
• Core Size: 8-Bit
• Speed: 4MHz
• Connectivity: SCI, SPI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 62
• Program Memory Size: 24KB (24K x 8)
• Program Memory Type: OTP
• Eeprom Size: 640 x 8
• Ram Size: 768 x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 8x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 80-QFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Memory Expansion and Chip Selects
11.4 Chip Selects
Technical Data
238
The M68HC11K Family microcontrollers contain a set of four
software-configured chip select signals which can reduce the amount of
external glue logic needed to interface the MCU to external devices in
the memory map. Each chip select signal is asserted when the CPU
accesses a memory location in its designated range, which is
determined by writes to control registers. Polarity of most chip-select
signals is programmable, as well as the segment of the address cycle
during which the signal is asserted (high E clock or address valid). Some
chip-select signals can be programmed to drive each other as well as
their own designated sections of memory (see
Driving
is asserted can be “stretched” up to three clock cycles (see
Stretching).
The four chip-select signals operate only in expanded modes. The
program chip select (CSPROG) is used to enable external memory in
the 64-Kbyte memory map that contains the reset vectors and program.
The chip select for I/O (CSIO) operates only within the first eight Kbytes
of the memory map. The two general-purpose chip selects, CSGP1 and
CSGP2, can enable devices anywhere in the 1-Mbyte expanded
memory space. Any port H pins 4-7 that are not used for chip-select
functions can serve as GPIO pins.
The six chip select control registers are:
Table 11-4
•
•
•
Freescale Semiconductor, Inc.
For More Information On This Product,
CSCTL enables and controls most of the features in CSPROG
and CSIO.
GPCS1A, GPCS1C, GPCS2A, and GPCS2C define most of the
operations of the two general-purpose chip selects.
CSCSTR controls clock stretching for all four signals.
Another), and the bus cycle during which any chip-select signal
Memory Expansion and Chip Selects
summarizes the controls for each of the chip-select signals.
Go to: www.freescale.com
11.4.4 One Chip Select
M68HC11K Family
11.4.5 Clock
MOTOROLA