M30626FJPFP#D5C Renesas Electronics America, M30626FJPFP#D5C Datasheet - Page 180

• Manufacturer Part Number: M30626FJPFP#D5C
• Description: MCU 3/5V 512K 100-QFP
• Manufacturer: Renesas Electronics America
• Series: M16C™ M16C/60r

Specifications of M30626FJPFP#D5C

• Core Processor: M16C/60
• Core Size: 16-Bit
• Speed: 24MHz
• Connectivity: I²C, IEBus, UART/USART
• Peripherals: DMA, WDT
• Number Of I /o: 85
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 31K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 26x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 85°C
• Package / Case: 100-QFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

M16C/62P Group (M16C/62P, M16C/62PT)
Rev.2.41
REJ09B0185-0241
Figure 15.21
Timer Bi Mode Register (i=0 to 5)
b7 b6 b5 b4
NOTES :
1.
2.
This flag is indeterminate after reset. When the TBiS bit = 1 (start counting), the MR3 bit is cleared to “0” (no overflow )
by w riting to the TBiMR register at the next count timing or later after the MR3 bit w as set to “1” (overflow ed). The
MR3 bit cannot be set to “1” in a program. The TB0S to TB2S bits are assigned to the bit 5 to bit 7 in the TABSR
register, and the TB3S to TB5S bits are assigned to the bit 5 to bit 7 in the TBSR register.
Selected by PCLK0 bit in the PCLKR register.
Jan 10, 2006
b3 b2 b1 b0
1 0
TBiMR Register in Pulse Period and Pulse Width Measurement Mode
Bit Symbol
TB0MR to TB2MR
TB3MR to TB5MR
TMOD0
TMOD1
TCK0
TCK1
MR0
MR1
MR2
MR3
Page 163 of 390
Symbol
Operation Mode Select Bit
Measurement Mode Select
Bit
TB0MR, TB3MR registers
TB1MR, TB2MR, TB4MR, TB5MR registers
Timer Bi Overflow Flag
Count Source Select Bit
Set to “0” in pulse period and pulse w idth measurement mode
Nothing is assigned. When w rite, set to “0”.
When read, its content is indeterminate.
Bit Name
039Bh to 039Dh
035Bh to 035Dh
Address
(1)
b1 b0
1 0 : Pulse period / pulse w idth measurement
b3 b2
0 0 : Pulse period measurement
0 1 : Pulse period measurement
1 0 : Pulse w idth measurement
1 1 : Do not set to this value
b7 b6
0 0 : f1 or f2
0 1 : f8
1 0 : f32
1 1 : fC32
0 : Timer did not overflow
1 : Timer has overflow ed
(Measurement betw een a falling edge and
(Measurement betw een a rising edge and
(Measurement betw een a falling edge and
mode
the next falling edge of measured pulse)
the next rising edge of measured pulse)
the next rising edge of measured pulse
and betw een a rising edge and the next
falling edge)
(2)
After Reset
00XX0000b
00XX0000b
Function
15. Timers
RW
RW
RW
RW
RW
RW
RW
RW
RO
—