M30626FJPFP#D5C Renesas Electronics America, M30626FJPFP#D5C Datasheet - Page 302

• Manufacturer Part Number: M30626FJPFP#D5C
• Description: MCU 3/5V 512K 100-QFP
• Manufacturer: Renesas Electronics America
• Series: M16C™ M16C/60r

Specifications of M30626FJPFP#D5C

• Core Processor: M16C/60
• Core Size: 16-Bit
• Speed: 24MHz
• Connectivity: I²C, IEBus, UART/USART
• Peripherals: DMA, WDT
• Number Of I /o: 85
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 31K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 26x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 85°C
• Package / Case: 100-QFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

M16C/62P Group (M16C/62P, M16C/62PT)
Rev.2.41
REJ09B0185-0241
22.3.4.9
22.3.4.10 Wait Mode
22.3.4.11 Stop Mode
22.3.4.12 Low-Power Consumption Mode and On-chip Oscillator Low-power
Write commands and data to even addresses in the user ROM area.
When entering wait mode, set the FMR01 bit to “0” (CPU rewrite mode disabled) before executing the WAIT
instruction.
When entering stop mode, the following settings are required:
If the CM05 bit is set to “1” (main clock stopped), do not execute the following commands:
•
•
•
•
•
•
Jan 10, 2006
Set the FMR01 bit to “0” (CPU rewrite mode disabled). Disable DMA transfer before setting the CM10 bit
to “1” (stop mode).
Program
Block erase
Erase all unlocked blocks
Lock bit program
Read lock bit status
Writing Command and Data
Consumption Mode
Page 285 of 390
22. Flash Memory Version