SAK-C164CM-4EF AB Infineon Technologies, SAK-C164CM-4EF AB Datasheet - Page 32

IC MCU 16BIT 32KB OTP TQFP-64-4

SAK-C164CM-4EF AB

Manufacturer Part Number
SAK-C164CM-4EF AB
Description
IC MCU 16BIT 32KB OTP TQFP-64-4
Manufacturer
Infineon Technologies
Series
C16xxr
Datasheet

Specifications of SAK-C164CM-4EF AB

Core Processor
C166
Core Size
16-Bit
Speed
20MHz
Connectivity
CAN, EBI/EMI, SPI, UART/USART
Peripherals
POR, PWM, WDT
Number Of I /o
50
Program Memory Size
32KB (32K x 8)
Program Memory Type
OTP
Ram Size
2K x 8
Voltage - Supply (vcc/vdd)
4.5 V ~ 5.5 V
Data Converters
A/D 8x10b
Oscillator Type
External
Operating Temperature
-40°C ~ 125°C
Package / Case
64-LFQFP
Data Bus Width
16 bit
Data Ram Size
2 KB
Interface Type
1xASC, 1xSSC
Maximum Clock Frequency
20 MHz
Number Of Programmable I/os
50
Number Of Timers
5
Operating Supply Voltage
5 V
Maximum Operating Temperature
+ 125 C
Mounting Style
SMD/SMT
Minimum Operating Temperature
- 40 C
On-chip Adc
10 bit, 8 Channel
Packages
P-TQFP-64
Max Clock Frequency
20.0 MHz
Sram (incl. Cache)
2.0 KByte
Can Nodes
1
A / D Input Lines (incl. Fadc)
8
Program Memory
32.0 KByte
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Eeprom Size
-
Lead Free Status / Rohs Status
 Details
Other names
SAK-C164CM-4EFAB
SAK-C164CM-4EFABINTR
SAK-C164CM-4EFABTR
SAK-C164CM-4EFABTR
SAKC164CM4EFABXT
SP000056829
SP000104063
C164CM
C164SM
Parallel Ports
The C164CM provides up to 50 I/O lines which are organized into four input/output ports
and one input port. All port lines are bit-addressable, and all input/output lines are
individually (bit-wise) programmable as inputs or outputs via direction registers. The I/O
ports are true bidirectional ports which are switched to high impedance state when
configured as inputs. The output drivers of Port 8 can be configured (pin by pin) for push/
pull operation or open-drain operation via a control register. During the internal reset, all
port pins are configured as inputs.
All port lines have programmable alternate input or output functions associated with
them. All port lines that are not used for these alternate functions may be used as general
purpose IO lines.
PORT0 may be used as address and data lines when accessing external memory. Also
the serial interfaces ASC0 and SSC use the upper pins of P0H.
Ports P1L, P1H, and P8 are associated with the capture inputs or compare outputs of
the CAPCOM units and/or serve as external interrupt inputs.
Port 5 is used for the analog input channels to the A/D converter or timer control signals.
Port 20 includes the bus control signals RD, WR, ALE, the configuration input EA, the
the system control output RSTOUT, and the system clock output CLKOUT (or the
programmable frequency output FOUT).
The edge characteristics (transition time) and driver characteristics (output current) of
the C164CM’s port drivers can be selected via the Port Output Control registers
(POCONx).
Data Sheet
28
V1.0, 2001-05

Related parts for SAK-C164CM-4EF AB