BA15218F-E2 Rohm Semiconductor, BA15218F-E2 Datasheet - Page 45

• Manufacturer Part Number: BA15218F-E2
• Description: IC OPAMP DUAL 16V SOP-8
• Manufacturer: Rohm Semiconductor

Specifications of BA15218F-E2

• Amplifier Type: General Purpose
• Number Of Circuits: 2
• Slew Rate: 3 V/µs
• Gain Bandwidth Product: 10MHz
• Current - Input Bias: 50nA
• Voltage - Input Offset: 500µV
• Current - Supply: 5mA
• Current - Output / Channel: 50mA
• Voltage - Supply, Single/dual (±): 4 V ~ 32 V, ±2 V ~ 16 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 8-SOP
• Number Of Channels: 2
• Voltage Gain Db: 110 dB
• Common Mode Rejection Ratio (min): 70 dB
• Input Offset Voltage: 5 mV
• Operating Supply Voltage: 4 V to 32 V
• Supply Current: 8 mA
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Maximum Dual Supply Voltage: +/- 16 V
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Output Type: -
• -3db Bandwidth: -
• Lead Free Status / Rohs Status: Details
• Other names: BA15218F-E2

●Description of electrical characteristics
BA4558F,BA4558R F/FV/FVM,BA4560F,BA4560RF/FV/FVM,BA4564RFVBA4580RF/FVM,BA4584FV,
BA4584RF/FV,BA8522RF/FV/FVM,BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM
© 2010 ROHM Co., Ltd. All rights reserved.
www.rohm.com
Described here are the terms of electric characteristics used in this technical note. Items and symbols used are also shown.
Note that item name and symbol and their meaning may differ from those on another manufacture’s document or general document.
1. Absolute maximum ratings
2. Electrical characteristics item
2.10 Common-mode rejection ratio (CMRR)
2.11 Power supply rejection ratio (PSRR)
Absolute maximum rating item indicates the condition which must not be exceeded. Application of voltage in excess of
absolute maximum rating or use out of absolute maximum rated temperature environment may cause deterioration of
characteristics.
1.1 Power supply voltage (VCC-VEE)
1.2 Differential input voltage (Vid)
1.3 Input common-mode voltage range (Vicm)
1.4 Power dissipation (Pd)
2.1 Input offset voltage (Vio)
2.2 Input offset current (Iio)
2.3 Input bias current (Ib)
2.4 Input common-mode voltage range(Vicm)
2.5 Large signal voltage gain (AV)
2.6 Circuit current (ICC)
2.7 Output sink current (IOL)
2.8 Output saturation voltage low level output voltage (VOL)
2.9 Output leakage current, High level output current (I leak)
Indicates the maximum voltage that can be applied between the positive power supply terminal and negative power
supply terminal without deterioration or destruction of characteristics of internal circuit.
Indicates the maximum voltage that can be applied between non-inverting terminal and inverting terminal without
deterioration and destruction of characteristics of IC.
Indicates the maximum voltage that can be applied to non-inverting terminal and inverting terminal without
deterioration or destruction of characteristics. Input common-mode voltage range of the maximum ratings not assure
normal operation of IC. When normal operation of IC is desired, the input common-mode voltage of characteristics
item must be followed.
Indicates the power that can be consumed by specified mounted board at the ambient temperature 25℃(normal temperature).
As for package product, Pd is determined by the temperature that can be permitted by IC chip in the package
(maximum junction temperature)and thermal resistance of the package.
Indicates the voltage difference between non-inverting terminal and inverting terminal. It can be translated into the
input voltage difference required for setting the output voltage at 0 [V] .
Indicates the difference of input bias current between non-inverting terminal and inverting terminal.
Indicates the current that flows into or out of the input terminal. It is defined by the average of input bias current at
non-inverting terminal and input bias current at inverting terminal.
Indicates the input voltage range where IC operates normally.
Indicates the amplifying rate (gain) of output voltage against the voltage difference between non-inverting terminal
and Inverting terminal. It is normally the amplifying rate (gain) with reference to DC voltage.
Av = (Output voltage fluctuation) / (Input offset fluctuation)
Indicates the IC current that flows under specified conditions and no-load steady status.
Denotes the maximum current that can be output under specific output conditions.
Signifies the voltage range that can be output under specific output conditions.
Indicates the current that flows into IC under specified input and output conditions.
Indicates the ratio of fluctuation of input offset voltage when in-phase input voltage is changed. It is normally the
fluctuation of DC.
CMRR = (Change of Input common-mode voltage) / (Input offset fluctuation)
Indicates the ratio of fluctuation of input offset voltage when supply voltage is changed. It is normally the fluctuation of
DC.
PSRR = (Change of power supply voltage) / (Input offset fluctuation)
45/48
Technical Note
2010.12 - Rev.A