HA3-5002-5Z

Manufacturer Part NumberHA3-5002-5Z
DescriptionIC BUFFER 110MHZ HIGH OUT 8-DIP
ManufacturerIntersil
TypeHigh Output, High Slew Rate
HA3-5002-5Z datasheets
 

Specifications of HA3-5002-5Z

Amplifier TypeBufferNumber Of Circuits1
Slew Rate1300 V/µs-3db Bandwidth110MHz
Current - Input Bias2µAVoltage - Input Offset5000µV
Current - Supply8.3mACurrent - Output / Channel220mA
Voltage - Supply, Single/dual (±)10 V ~ 40 V, ±5 V ~ 20 VOperating Temperature0°C ~ 75°C
Mounting TypeThrough HolePackage / Case8-DIP (0.300", 7.62mm)
Bandwidth110 MHzCurrent, Input Bias2 μA
Current, Output220 mACurrent, Supply8.3 mA
Harmonic Distortion0.005 %Impedance, Thermal92 °C/W
Number Of AmplifiersSinglePackage TypePDIP-8
Propagation Delay2 nsResistance, Input3 Megohms
Temperature, Operating, Range0 to +75 °CTime, Rise3.6 ns
Voltage, Gain0.995 V/VVoltage, Input Offset5 mV
Voltage, Noise18 μVp-pVoltage, Output Swing±13.9 V
Voltage, Supply±15 VNo. Of Amplifiers1
Gain Bandwidth110MHzSupply Voltage Range± 12V To ± 15V
Output Current220mAAmplifier OutputSingle Ended
Rohs CompliantYesLead Free Status / RoHS StatusLead free / RoHS Compliant
Output Type-Gain Bandwidth Product-
1
Page 1
2
Page 2
3
Page 3
4
Page 4
5
Page 5
6
Page 6
7
Page 7
8
Page 8
9
Page 9
10
Page 10
11
12
13
14
Page 1/14

Download datasheet (859Kb)Embed
Next
®
Data Sheet
110MHz, High Slew Rate, High Output
Current Buffer
The HA-5002 is a monolithic, wideband, high slew rate, high
output current, buffer amplifier.
Utilizing the advantages of the Intersil D.I. technologies, the
HA-5002 current buffer offers 1300V/µs slew rate with
110MHz of bandwidth. The ±200mA output current capability
is enhanced by a 3Ω output impedance.
The monolithic HA-5002 will replace the hybrid LH0002 with
corresponding performance increases. These characteristics
range from the 3000kΩ input impedance to the increased
output voltage swing. Monolithic design technologies have
allowed a more precise buffer to be developed with more than
an order of magnitude smaller gain error.
The HA-5002 will provide many present hybrid users with a
higher degree of reliability and at the same time increase
overall circuit performance.
For the military grade product, refer to the HA-5002/883
datasheet.
Ordering Information
PART NUMBER
PART MARKING
HA2-5002-2
HA2-5002-2
HA2-5002-5
HA2-5002-5
HA3-5002-5
HA3-5002-5
HA3-5002-5Z (Note)
HA3-5002-5Z
HA4P5002-5
HA4P5002-5
HA4P5002-5Z (Note)
HA4P5002-5Z
HA9P5002-5
50025
HA9P5002-5Z (Note)
50025Z
HA9P5002-9
50029
HA9P5002-9Z (Note)
50029Z
*Pb-free PDIPs can be used for through hole wave solder processing only. They are not intended for use in Reflow solder processing applications.
NOTE: Intersil Pb-free plus anneal products employ special Pb-free material sets; molding compounds/die attach materials and 100% matte tin
plate termination finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are
MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
1
March 8, 2006
Features
• Voltage Gain. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.995
• High Input Impedance . . . . . . . . . . . . . . . . . . . . . .3000kΩ
• Low Output Impedance . . . . . . . . . . . . . . . . . . . . . . . . 3Ω
• Very High Slew Rate . . . . . . . . . . . . . . . . . . . . . 1300V/µs
• Very Wide Bandwidth . . . . . . . . . . . . . . . . . . . . . . 110MHz
• High Output Current. . . . . . . . . . . . . . . . . . . . . . . . . . ±200mA
• Pulsed Output Current . . . . . . . . . . . . . . . . . . . . . . 400mA
• Monolithic Construction
• Pb-Free Plus Anneal Available (RoHS Compliant)
Applications
• Line Driver
• Data Acquistion
• 110MHz Buffer
• Radara Cable Driver
• High Power Current Booster
• High Power Current Source
• Sample and Holds
• Video Products
TEMP.
RANGE (°C)
-55 to 125
8 Pin Metal Can
0 to 75
8 Pin Metal Can
0 to 75
8 Ld PDIP
0 to 75
8 Ld PDIP* (Pb-free)
0 to 75
20 Ld PLCC
0 to 75
20 Ld PLCC (Pb-free)
0 to 75
8 Ld SOIC
0 to 75
8 Ld SOIC (Pb-free)
-40 to 85
8 Ld SOIC
-40 to 85
8 Ld SOIC (Pb-free)
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
|
1-888-INTERSIL or 1-888-468-3774
Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2003-2006. All Rights Reserved.
All other trademarks mentioned are the property of their respective owners.
HA-5002
FN2921.11
PKG.
PACKAGE
DWG. #
T8.C
T8.C
E8.3
E8.3
N20.35
N20.35
M8.15
M8.15
M8.15
M8.15

HA3-5002-5Z Summary of contents

  • Page 1

    ... For the military grade product, refer to the HA-5002/883 datasheet. Ordering Information PART NUMBER PART MARKING HA2-5002-2 HA2-5002-2 HA2-5002-5 HA2-5002-5 HA3-5002-5 HA3-5002-5 HA3-5002-5Z (Note) HA3-5002-5Z HA4P5002-5 HA4P5002-5 HA4P5002-5Z (Note) HA4P5002-5Z HA9P5002-5 50025 HA9P5002-5Z (Note) 50025Z HA9P5002-9 50029 HA9P5002-9Z (Note) 50029Z *Pb-free PDIPs can be used for through hole wave solder processing only ...

  • Page 2

    Pinouts HA-5002 (PDIP, SOIC) TOP VIEW OUT HA-5002 HA-5002 (PLCC) TOP VIEW ...

  • Page 3

    Absolute Maximum Ratings Voltage Between V+ and V- Terminals 44V Input Voltage . . . . . . . . . ...

  • Page 4

    Electrical Specifications V SUPPLY PARAMETER Differential Gain R = 500Ω L Differential Phase R = 500Ω L POWER REQUIREMENTS Supply Current Power Supply Rejection Ratio A = 10V V NOTE: Slew Rate . 3. -------------------------- - ; V FPBW P ...

  • Page 5

    Test Circuit and Waveforms OUT R = 50Ω 100Ω LARGE SIGNAL WAVEFORMS Schematic Diagram Application Information Layout Considerations The wide bandwidth ...

  • Page 6

    It is also recommended that the bypass capacitors be connected close to the HA-5002 (preferably directly to the supply pins). Operation at Reduced Supply Levels The HA-5002 ...

  • Page 7

    Typical Application +12V 50Ω 50Ω -12V Typical Performance Curves 9 = ±15V 50Ω GAIN 0 ...

  • Page 8

    Typical Performance Curves 3 = ±15V -10 -11 -60 -40 - TEMPERATURE (°C) FIGURE 8. OFFSET VOLTAGE vs TEMPERATURE 15 = ±15V, R ...

  • Page 9

    Typical Performance Curves 125° -55° SUPPLY VOLTAGE (±V) FIGURE 14. V MAXIMUM vs ...

  • Page 10

    Metallization Mask Layout V + (ALT HA-5002 HA-5002 OUT V - (ALT FN2921.11 March 8, 2006 ...

  • Page 11

    Dual-In-Line Plastic Packages (PDIP INDEX N/2 AREA -B- -A- D BASE PLANE -C- SEATING PLANE 0.010 (0.25 NOTES: 1. Controlling Dimensions: INCH. In case of conflict between ...

  • Page 12

    Metal Can Packages (Can) REFERENCE PLANE Ø ØD ØD1 Øb1 Øb F BASE AND Q SEATING PLANE BASE METAL LEAD FINISH Øb1 Øb2 SECTION A-A NOTES: 1. (All leads) Øb applies between L1 ...

  • Page 13

    Plastic Leaded Chip Carrier Packages (PLCC) 0.042 (1.07) 0.042 (1.07) 0.048 (1.22) 0.056 (1.42) PIN (1) IDENTIFIER 0.050 (1.27 0.020 (0.51) MAX 3 PLCS 0.026 (0.66) 0.032 (0.81) 0.045 (1.14) MIN VIEW “A” ...

  • Page 14

    ... Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use ...