MCP1702-3002E/TO Microchip Technology, MCP1702-3002E/TO Datasheet

IC REG LDO 3V 250MA TO-92-3

MCP1702-3002E/TO

Manufacturer Part Number
MCP1702-3002E/TO
Description
IC REG LDO 3V 250MA TO-92-3
Manufacturer
Microchip Technology

Specifications of MCP1702-3002E/TO

Package / Case
TO-92-3 (Standard Body), TO-226
Regulator Topology
Positive Fixed
Voltage - Output
3V
Voltage - Input
Up to 13.2V
Voltage - Dropout (typical)
0.625V @ 250mA
Number Of Regulators
1
Current - Output
250mA (Min)
Operating Temperature
-40°C ~ 125°C
Mounting Type
Through Hole
Number Of Outputs
1
Polarity
Positive
Input Voltage Max
13.2 V
Output Voltage
3 V
Output Type
Fixed
Dropout Voltage (max)
0.975 V at 250 mA
Output Current
250 mA
Line Regulation
0.1 % / V
Load Regulation
1 %
Voltage Regulation Accuracy
0.4 %
Maximum Operating Temperature
+ 125 C
Mounting Style
Through Hole
Minimum Operating Temperature
- 40 C
Primary Input Voltage
4V
Output Voltage Fixed
3V
Dropout Voltage Vdo
625mV
No. Of Pins
3
Voltage Regulator Case Style
TO-92
Operating Temperature Range
-40°C To +125°C
Rohs Compliant
Yes
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
For Use With
GPIODM-KPLCD - BOARD DEMO LCD GPIO EXP KEYPAD
Current - Limit (min)
-
Lead Free Status / Rohs Status
Lead free / RoHS Compliant

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
MCP1702-3002E/TO
Manufacturer:
TI
Quantity:
1 001
Features:
• 2.0 µA Quiescent Current (typical)
• Input Operating Voltage Range: 2.7V to 13.2V
• 250 mA Output Current for Output Voltages  2.5V
• 200 mA Output Current for Output Voltages < 2.5V
• Low Dropout (LDO) Voltage
• 0.4% Typical Output Voltage Tolerance
• Standard Output Voltage Options:
• Output Voltage Range 1.2V to 5.5V in 0.1V
• Stable with 1.0 µF to 22 µF Output Capacitor
• Short-Circuit Protection
• Overtemperature Protection
Applications:
• Battery-powered Devices
• Battery-powered Alarm Circuits
• Smoke Detectors
• CO
• Pagers and Cellular Phones
• Smart Battery Packs
• Low Quiescent Current Voltage Reference
• PDAs
• Digital Cameras
• Microcontroller Power
• Solar-Powered Instruments
• Consumer Products
• Battery Powered Data Loggers
Related Literature:
• AN765, “Using Microchip’s Micropower LDOs”,
• AN766, “Pin-Compatible CMOS Upgrades to
• AN792, “A Method to Determine How Much
 2010 Microchip Technology Inc.
- 625 mV typical @ 250 mA (V
- 1.2V, 1.5V, 1.8V, 2.5V, 2.8V,
Increments (50 mV increments available upon
request)
DS00765, Microchip Technology Inc., 2002
Bipolar LDOs”, DS00766,
Microchip Technology Inc., 2002
Power a SOT-23 Can Dissipate in an Application”,
DS00792, Microchip Technology Inc., 2001
3.0V, 3.3V, 4.0V, 5.0V
2
Detectors
250 mA Low Quiescent Current LDO Regulator
OUT
= 2.8V)
Description:
The MCP1702 is a family of CMOS low dropout (LDO)
voltage regulators that can deliver up to 250 mA of
current while consuming only 2.0 µA of quiescent
current (typical). The input operating range is specified
from 2.7V to 13.2V, making it an ideal choice for two to
six primary cell battery-powered applications, 9V
alkaline
applications.
The MCP1702 is capable of delivering 250 mA with
only 625 mV (typical) of input to output voltage
differential (V
of the MCP1702 is typically ±0.4% at +25°C and ±3%
maximum over the operating junction temperature
range of -40°C to +125°C. Line regulation is ±0.1%
typical at +25°C.
Output voltages available for the MCP1702 range from
1.2V to 5.0V. The LDO output is stable when using only
1 µF of output capacitance. Ceramic, tantalum or
aluminum electrolytic capacitors can all be used for
input
overtemperature shutdown provide a robust solution
for any application.
Package options include the SOT-23A, SOT-89-3, and
TO-92.
Package Types
3-Pin SOT-23A
and
GND V
and
MCP1702
1
V
OUT
3
MCP1702
IN
output.
OUT
one
2
= 2.8V). The output voltage tolerance
GND
3-Pin TO-92
or
V
IN
Overcurrent
two
V
OUT
Bottom
1 2
View
3-Pin SOT-89
cell
GND
1
MCP1702
3
DS22008E-page 1
V
V
Li-Ion-powered
2
IN
IN
V
limit
OUT
3
and

Related parts for MCP1702-3002E/TO

MCP1702-3002E/TO Summary of contents

Page 1

... DS00792, Microchip Technology Inc., 2001  2010 Microchip Technology Inc. Description: The MCP1702 is a family of CMOS low dropout (LDO) voltage regulators that can deliver up to 250 mA of current while consuming only 2.0 µA of quiescent current (typical). The input operating range is specified from 2 ...

Page 2

... MCP1702 Functional Block Diagrams V IN Overcurrent Overtemperature Typical Application Circuits + Battery 1 µF Ceramic DS22008E-page 2 MCP1702 Error Amplifier +V IN Voltage - Reference + GND MCP1702 V OUT GND V OUT V OUT 3.3V I OUT OUT 1 µF Ceramic  2010 Microchip Technology Inc. ...

Page 3

... The 2.7V (whichever is greater); I DROPOUT(MAX Temperature * OUT-HIGH = lowest voltage measured over the temperature range 2.7V, whichever is greater. OUT(MAX) DROPOUT(MAX) ,  MCP1702 Note OUT(MAX) DROPOUT(MAX) Conditions Note  2.5V For V R  2.7V For V < 2.5V  2.95V For V < ...

Page 4

... MCP1702 DC CHARACTERISTICS (CONTINUED) Electrical Specifications: Unless otherwise specified, all limits are established for 100 µ µF (X7R µF (X7R), T LOAD OUT IN Boldface type applies for junction temperatures, T Parameters Sym Dropout Voltage V DROPOUT (Note 1, Note 5) Output Delay Time T DELAY Output Noise e N Power Supply Ripple ...

Page 5

... JA  — 100 — °C/W JC  — 131.9 — °C/W JA  — 66.3 — °C  Exceeding the maximum allowable power MCP1702 Conditions Steady State Transient EIA/JEDEC JESD51-7 FR-4 0.063 4-Layer Board EIA/JEDEC JESD51-7 FR-4 0.063 4-Layer Board DS22008E-page 5 ...

Page 6

... MCP1702 2.0 TYPICAL PERFORMANCE CURVES Note: The graphs and tables provided following this note are a statistical summary based on a limited number of samples and are provided for informational purposes only. The performance characteristics listed herein are not tested or guaranteed. In some graphs or tables, the data presented may be outside the specified operating range (e ...

Page 7

... FIGURE 2-11: Current. 5.04 5.03 5.02 5.01 5.00 4.99 -45°C 4.98 4.97 4. FIGURE 2-12: Current. MCP1702 = 1 µF Ceramic (X7R 100 µ 1.2V OUT 0°C -45°C +25°C +90° 100 Load Current (mA) Output Voltage vs. Load V = 2.8V OUT +130°C +90° ...

Page 8

... MCP1702 Note: Unless otherwise indicated 2.8V +25° OUT(MAX) DROPOUT(MAX) 1. 1.8V OUT 1.30 1.20 +25°C 1.10 1.00 0.90 0.80 0.70 0.60 100 120 140 160 Load Current (mA) FIGURE 2-13: Dropout Voltage vs. Load Current. 1.00 0.90 0.80 0.70 +90°C 0.60 +25°C 0.50 0.40 0.30 -45° ...

Page 9

... FIGURE 2-23: Temperature. 0. 5.0V V OUT OUT V IN 0.14 0.12 0.10 0. 13.2V IN 0.06 105 130 -45 FIGURE 2-24: Temperature. MCP1702 = 1 µF Ceramic (X7R 100 µ 1.2V OUT V = 2.7V to 13. 100 mA - 105 130 Temperature (°C) Line Regulation vs. = 2.8V = 3.8V to 13.2V 250 mA 200 mA ...

Page 10

... MCP1702 Note: Unless otherwise indicated 2.8V +25° OUT(MAX) DROPOUT(MAX) 0 -10 -20 -30 -40 -50 V =1. =1.0 μF ceramic X7R -60 OUT V =2. μF IN -80 I =1.0 mA OUT -90 0.01 0 Frequency (kHz) FIGURE 2-25: Power Supply Ripple Rejection vs. Frequency. 0 -10 -20 -30 -40 -50 V =5. =1.0 μF ceramic X7R ...

Page 11

... LDO circuit. For applications that have OUT load currents below 100 mA, the input capacitance requirement can be lowered. The type of capacitor used can be ceramic, tantalum electrolytic. The low ESR characteristics of the ceramic will yield better noise and PSRR performance at high-frequency. MCP1702 Function or battery type. For most or aluminum ...

Page 12

... The MCP1702 internal circuitry monitors the amount of current flowing through the P-Channel pass transistor. In the event of a short-circuit or excessive output current, the MCP1702 will turn off the P-Channel device for a short period, after which the LDO will attempt to restart. If the excessive current remains, the cycle will repeat itself ...

Page 13

... Li-Ion cell batteries. 5.1 Input The input of the MCP1702 is connected to the source of the P-Channel PMOS pass transistor. As with all LDO circuits, a relatively low source impedance (10) is needed to prevent the input impedance from causing the LDO to become unstable ...

Page 14

... OUT 6.2 Power Calculations 6.2.1 POWER DISSIPATION The internal power dissipation of the MCP1702 is a function of input voltage, output voltage and output current. The power dissipation result of the quiescent current draw low insignificant (2.0 µ The following equation can be used to IN calculate the internal power dissipation of the LDO ...

Page 15

... P D(MAX) 6.4 Voltage Reference ) x The MCP1702 can be used not only as a regulator, but also as a low quiescent current voltage reference. In many microcontroller applications, the initial accuracy of the reference can be calibrated using production test equipment or by using a ratio measurement. When the initial accuracy is calibrated, the thermal stability and line regulation tolerance are the only errors introduced by the MCP1702 LDO ...

Page 16

... For some applications, there are pulsed load current events that may exceed the specified 250 mA maximum specification of the MCP1702. The internal current limit of the MCP1702 will prevent high peak load demands from causing non-recoverable damage. The 250 mA rating is a maximum average continuous rating ...

Page 17

... Custom 4.5 GC 2.1 2.2 GD 4.1 Standard Extended Temp Voltage * Symbol Voltage * 1.2 HF 3.0 1.5 HG 3.3 1.8 HK 3.6 2.5 HH 4.0 2.8 HJ 5.0 Custom 2.1 H9 4.2 3.2 — — MCP1702 Example: HANN Example: HA1014 256 Example: 1702 1202E TO 014256 DS22008E-page 17 ...

Page 18

... MCP1702 /HDG 3ODVWLF 6PDOO 2XWOLQH 7UDQVLVWRU &% >627$@ 1RWH 1RWHV DS22008E-page φ L  2010 Microchip Technology Inc. ...

Page 19

... Note: For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/packaging  2010 Microchip Technology Inc. MCP1702 DS22008E-page 19 ...

Page 20

... MCP1702 /HDG 3ODVWLF 6PDOO 2XWOLQH 7UDQVLVWRU +HDGHU 0% >627@ 1RWH 1RWHV DS22008E-page  2010 Microchip Technology Inc. ...

Page 21

... Note: For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/packaging  2010 Microchip Technology Inc. MCP1702 DS22008E-page 21 ...

Page 22

... MCP1702 /HDG 3ODVWLF 7UDQVLVWRU 2XWOLQH 72 >72@ 1RWH 1RWHV DS22008E-page  2010 Microchip Technology Inc. ...

Page 23

... Temperature Specifications table. 3. Page 16: Updated Package Outline Drawings in Section 7.0 “Packaging Information”. 4. Page 21: Updated Revision History. Page 23: Corrected examples in Product 5. Identification System. Revision A (September 2006) • Original Release of this Document.  2010 Microchip Technology Inc. Junction OUT second MCP1702 DS22008E-page 23 ...

Page 24

... To order or obtain information, e.g., on pricing or delivery, refer to the factory or the listed sales office PART NO Device Tape Output Feature and Reel Voltage Code Device: MCP1702: 2 µA Low Dropout Positive Voltage Regulator Tape and Reel Tape and Reel Output Voltage *: 12 = 1.2V “Standard” 1.5V “Standard” 1.8V “Standard” 2.5V “ ...

Page 25

... PICtail, REAL ICE, rfLAB, Select Mode, Total Endurance, TSHARC, UniWinDriver, WiperLock and ZENA are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. SQTP is a service mark of Microchip Technology Incorporated in the U.S.A. All other trademarks mentioned herein are property of their respective companies. ...

Page 26

... Philippines - Manila Tel: 63-2-634-9065 Fax: 63-2-634-9069 Singapore Tel: 65-6334-8870 Fax: 65-6334-8850 Taiwan - Hsin Chu Tel: 886-3-6578-300 Fax: 886-3-6578-370 Taiwan - Kaohsiung Tel: 886-7-213-7830 Fax: 886-7-330-9305 Taiwan - Taipei Tel: 886-2-2500-6610 Fax: 886-2-2508-0102 Thailand - Bangkok Tel: 66-2-694-1351 Fax: 66-2-694-1350  2010 Microchip Technology Inc. 08/04/10 ...

Related keywords