ERJ-XGNJ472Y Panasonic - ECG, ERJ-XGNJ472Y Datasheet - Page 8

• Manufacturer Part Number: ERJ-XGNJ472Y
• Description: RESISTOR 4.7K OHM 1/32W 5% 01005
• Manufacturer: Panasonic - ECG
• Series: ERJr

Specifications of ERJ-XGNJ472Y

• Resistance (ohms): 4.7K
• Power (watts): 0.03W, 1/32W
• Composition: Thick Film
• Temperature Coefficient: ±200ppm/°C
• Tolerance: ±5%
• Size / Dimension: 0.016" L x 0.008" W (0.40mm x 0.20mm)
• Height: 0.005" (0.13mm)
• Lead Style: Surface Mount (SMD - SMT)
• Package / Case: 01005 (0402 Metric)
• Resistance In Ohms: 4.70K
• Case: 01005 (0402 metric)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Other names: ERJXGNJ472Y; P4.7KAWTR

Subject
Part No.
9. Common precautions in handling resistors
Chip Resistor
(1) This specification shows the quality and performance of a unit component. Before adoption,
(2) We take no responsibility for troubles caused by the product usage that is not specified in
(3) Use fail-safe design and ensure safety by carrying out the following items in cases where it
(4) When a dogma shall be occurred about safety for this product, be sure to inform us rapidly,
(5) The product is designed to use in general standard applications of general electric
(6) If transient load (heavy load in a short time) like pulse is expected to be applied, carry out
be sure to evaluate and verify the product mounting it in your product.
this specification.
is forecast that the failure of the product gives serious damage to something important like
human life, for instant in traffic transportation equipment (trains, cars, traffic signal
equipment, etc.), medical equipment, aerospace equipment, electric heating appliances,
combustion and gas equipment, rotating equipment, disaster and crime preventive
equipment.
*Ensure safety as the system by setting protective circuits and protective equipment.
*Ensure safety as the system by setting such redundant circuits as do not cause danger by
operate your technical examination.
equipment (AV products, household electric appliances, office equipment, information and
communication equipment, etc.); hence, it do not take the use under the following special
environments into consideration.
Accordingly, the use in the following special environments, and such environmental
conditions may affect the performance of the product; prior to use, verify the performance,
reliability, etc. thoroughly.
1) Use in liquids such as water, oil, chemical, and organic solvent.
2) Use under direct sunlight, in outdoor or in dusty atmospheres.
3) Use in places full of corrosive gases such as sea breeze, Cl
4) Use in environment with large static electricity or strong electromagnetic waves.
5) Where the product is close to a heating component, and where an inflammable such as
6) Where the resistor is sealed or coated with resin, etc.
7) Where water or a water-soluble detergent is used in cleaning free soldering and in flux
8) Use in such a place where the product is wetted due to dew condensation.
evaluation and confirmation test with resistors actually mounted on your own board. When
the load of more than rated power is applied under the load condition at steady state, it
a single failure.
a polyvinyl chloride wire is arranged close to the product.
cleaning after soldering (Pay particular attention to soluble flux.)
PRODUCT SPECIFICATION FOR IMFORMATION
Panasonic Electronic Devices Co., Ltd.
ERJXGN
! Notice for use
2
, H
2
S, NH
Spec. No.
3
, SO
151-SRJ-EX07A
2
11
, and NO
-
7
X
.