RES 200 OHM 25W 1% D-PAK

MP725-200-1%

Manufacturer Part NumberMP725-200-1%
DescriptionRES 200 OHM 25W 1% D-PAK
ManufacturerCaddock Electronics Inc
SeriesMP725
MP725-200-1% datasheet
 


Specifications of MP725-200-1%

Temperature Coefficient-20/ +80ppm/°CResistance (ohms)200
Power (watts)25WCompositionThick Film
FeaturesCurrent Sense, Non-InductiveTolerance±1%
Size / Dimension0.325" L x 0.320" W (8.26mm x 8.13mm)Height0.110" (2.79mm)
Lead StyleSurface Mount (SMD - SMT)Package / CaseDPak (TO-252)
Resistance In Ohms200CaseDPak (TO-252)
Resistance200ohmResistance Tolerance± 1%
Power Rating25WResistor Element MaterialThick Film
Resistor Case StyleTO-252 (DPAK)Dielectric Strength1500 VAC (RMS)
Insulation Resistance10000 Megohms (Min.)Lead Pitch0.200 +⁄-0.010 in.
Length0.325 +⁄-0.020 in.Length, Lead0.160 +⁄-0.010 in.
Material, ElementThick FilmMounting TypeSurface Mount
Package TypeD-PakPower Dissipation2.5 W @ 25°C
Power Rating, Test Condition@ +25°CPower, Rating25 W
TerminationSMTThickness0.110 +⁄-0.010 in.
Voltage, Rating200 VDCWidth0.320 +⁄-0.010 in.
Thermal Resistance (rφj-c)5.0°C/WVoltage Rating200 Vrms AC
Termination StyleSMD/SMTOperating Temperature Range+ 25 C to + 150 C
Dimensions8.13 mm W x 8.26 mm L x 2.79 mm HLead Spacing5.08 mm
Lead Free Status / RoHS StatusLead free / RoHS CompliantOther namesMP725-200-FTR
Page 1/1

Download datasheet (177Kb)Embed
MP725 Surface Mount Power Film Resistors
D-Pak Style Surface Mount Power Package including Metal Tab - 0.020 ohm to 1.00 Kohm
Use your thermal design experience with power semiconductors in
D-Pak style power packages. This experience will help you get the most out
of this unique family of surface mount power resistors. The thermal design
issues are the same where power handling capability is based on the case
temperature which is maintained in your design.
MP725 Surface Mount Power Film Resistors introduce our proven
®
Micronox
resistance film system in the widely accepted D-Pak style surface
mount power package. The non-inductive design makes this resistor ideal in
high frequency communications, power switching circuits, and snubbers.
The special performance features of our patented MP725 Surface Mount
Power Film Resistors include:
D-Pak style power package for surface mount applications.
Metal tab assists in post surface mount soldering inspection.
Resistance values to 0.020 ohm for current sense applications.
Non-Inductive Design.
Up to 25 Watt power rating at +25°C case temperature.
Resistor element is electrically isolated from the metal heat sink tab.
Power
Dielect. Strength
Model No.
V
AC
Rating
RMS
*
MP725
25 Watts
1,500
*
The case temperature is to be used for purposes of
DERATING CURVE
establishing the maximum applied power. See Derating
100
Curve. The case temperature measurement is made on the
80
metal mounting tab against the molded body.
appropriately for the ambient temperature range, the thermal
60
resistance of the mounting surface, and the temperature
40
limitations of the adjacent materials (such as glass epoxy).
20
Derating ( thermal resistance ) is 0.200 W/°C ( 5.0°C/W ).
Power dissipation is 2.5 watts, at an ambient temperature of
0
25
100
150
25°C, when mounted on a double sided copper board (2 ounce,
CASE TEMPERATURE, °C
G-10 or FR-4) 1 inch x 1 inch x .063 inch (thick).
Standard Resistance Values:
0.020 Ω
0.25 Ω
3.00 Ω
25.0 Ω
150 Ω
0.025 Ω
0.30 Ω
3.30 Ω
27.0 Ω
200 Ω
0.030 Ω
0.33 Ω
4.00 Ω
30.0 Ω
250 Ω
0.033 Ω
0.40 Ω
5.00 Ω
33.0 Ω
300 Ω
0.040 Ω
0.50 Ω
7.50 Ω
40.0 Ω
330 Ω
0.050 Ω
0.75 Ω
8.00 Ω
47.0 Ω
400 Ω
0.075 Ω
1.00 Ω
10.0 Ω
50.0 Ω
470 Ω
0.10 Ω
1.50 Ω
12.0 Ω
56.0 Ω
500 Ω
0.15 Ω
2.00 Ω
15.0 Ω
75.0 Ω
560 Ω
0.20 Ω
2.50 Ω
20.0 Ω
100 Ω
750 Ω
120 Ω
1.00 K
PACKAGE DIMENSIONS
.320 ±.010
.110 ±.010
(8.13 ±.26)
(2.79 ±.26)
.040 ±.018
.250
.032 ±.003
(1.02 ±.46)
(6.35)
(.81 ±.08)
.275
(6.99)
.325 ±.020
Heat sink
MP 725
(8.26 ±.51)
height
10.0
1%
.053 ± .007
.160 ±.010
(1.35 ± .18)
(4.06 ±.26)
.030 ± .004
(.76 ± .10)
.200 ±.010
.070 ±.010
(5.08 ±.26)
(1.78 ±.26)
.058 ±.007
(1.47 ±.18)
.025 ±.004
Dimensions in inches and (millimeters)
(.64 ±.10)
Certain products shown in this catalog are covered by
one or more patents, there are also patents pending.
CAD
Applications Engineering
17271 North Umpqua Hwy.
Roseburg, Oregon 97470-9422
Phone: (541) 496-0700
For Caddock Distributors listed by country see caddock.com/contact/dist.html
Fax: (541) 496-0408
© 2004 Caddock Electronics, Inc.
www.caddock.com
Resistance
Max.
Terminal
Voltage
Max.
Min.
200
0.020 Ω
1.00K
Solderable
Derate
Custom resistance values can be
m a n u f a c t u r e d f o r h i g h q u a n t i t y
applications. Please contact Caddock
Applications Engineering.
Measurement Note:
For the specifications, resistance
measurement shall be made at the
foot of surface mount formed terminal.
FOOTPRINT FOR
SOLDERABLE CONTACT AREA
.310
(7.87)
.335
(8.51)
Scale:
1.5X
.070
(1.78)
.150
(3.81)
.100
.100
(2.54)
(2.54)
.065
.065
(1.65)
(1.65)
Soldering Note: During surface mount
soldering the soldering temperature profile
must not cause the metal tab of this
device to exceed 220°C.
DOC
K
e-mail: caddock@caddock.com • web: www.caddock.com
Specifications:
Resistance Tolerance:
±1% for 0.050Ω up to
1.00KΩ, ±5% for 0.020Ω up to 0.049Ω (5% and
20% are available for most resistance values).
Temperature Coefficient:
TC referenced to +25°C, ΔR taken at +150°C
0.50 ohm and above, -20 to +80 ppm/°C
0.050 ohm to 0.49 ohm, 0 to +200 ppm/°C
0.020 ohm to 0.049 ohm, 0 to +300 ppm/°C
Thermal Shock: Mil-Std-202, Method 107,
Cond. F, ΔR ±(0.5 percent + 0.0005 ohm) max.
Momentary Overload:
1.5 times rated power
with applied voltage not to exceed 1.5 times
maximum continuous operating voltage for 5
seconds, ΔR ±(0.5 percent + 0.0005 ohm) max.
Load Life: 2,000 hours at rated power, ΔR ±(1.0
percent + 0.0005 ohm). Power rating dependent
upon case temperature. See derating curve.
Moisture Resistance: Mil-Std-202, Method 106,
ΔR ±(0.5 percent + 0.0005 ohm) max.
Shock: 100G, Mil-Std-202, Method 213,
Cond. I, ΔR ±(0.4 percent + 0.0005 ohm) max.
Vibration, High Frequency: Mil-Std-202,
Method 204, Cond. D, ΔR ±(0.4 percent
+ 0.0005 ohm) max.
Terminal Strength:
Mil-Std-202, Method 211,
Cond. A (Pull Test) 5 lbs., ΔR ±(0.2 percent
+ 0.0005 ohm) max.
Insulation Resistance:
10,000 Megohms min.
The resistor is electrically isolated from the metal
tab.
DWV:
The
dielectric strength rating of
1500 V
AC is based upon connections made
rms
between terminals shorted and either the metal
surface the part is mounted to or a metal clip in
contact with the top surface of the part.
Packaging Note:
Quantities of 250 pieces or greater will be
supplied in tape and reel packaging. The full reel
quantity is 1250 pieces.
Ordering Information:
MP725 - 10.0 - 1%
Model Number:
Tolerance
Resistor Value:
Sales and Corporate Office
1717 Chicago Avenue
Riverside, California 92507-2364
Phone: (951) 788-1700
Fax: (951) 369-1151
28_IL101.1004