MCR50JZHJ000 Rohm Semiconductor, MCR50JZHJ000 Datasheet

RES 0.0 OHM 1/2W 2010 SMD

MCR50JZHJ000

Manufacturer Part Number
MCR50JZHJ000
Description
RES 0.0 OHM 1/2W 2010 SMD
Manufacturer
Rohm Semiconductor
Series
MCR50r
Datasheet

Specifications of MCR50JZHJ000

Resistance (ohms)
0.0
Power (watts)
0.5W, 1/2W
Composition
Thick Film
Tolerance
Jumper
Size / Dimension
0.197" L x 0.098" W (5.00mm x 2.50mm)
Height
0.022" (0.55mm)
Lead Style
Surface Mount (SMD - SMT)
Package / Case
2010 (5025 Metric)
Resistance In Ohms
0.0
Case
2010 (5025 metric)
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Features
-
Temperature Coefficient
-
Other names
RHM0.0BGTR

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
MCR50JZHJ000
Manufacturer:
ROHM
Quantity:
300 000
Thick Film Chip Resistors
1) Made of same material as the general purpose chip resistors (MCR10 / 18).
2) Highly reliable chip resistor
3) Electrodes not corroded by soldering
4) ROHM resistors have approved ISO9001- / ISO/TS 16949- certification. Design and specifications are subject to change
Jumper type
•Before using components in circuits where they will be exposed to transients such as pulse loads (short-duration, high-level loads), be certain to evaluate the
Rated power
Rated voltage
Nominal resistance
Operating temperature
c
Resistance
Rated current
Operating temperature
component in the mounted state. In addition, the reliability and performance of this component cannot be guaranteed if it is used with a steady state voltage that
is greater than its rated voltage.
www.rohm.com
Features
Ratings
Ruthenium oxide dielectric offers superior resistance to the elements.
Suitable for re-flow soldering.
without notice.
Carefully check the specification sheet supplied with the product before using or ordering it.
MCR50 (2010 size : 1 / 2W)
2009 ROHM Co., Ltd. All rights reserved.
Item
−55°C to +155°C
Power must be derated according to the power derating curve in
Figure 1 when ambient temperature exceeds 70˚C.
The voltage rating is calculated by the following equation. If the value
obtained exceeds the limiting element voltage, the voltage rating is
equal to the maximum operating voltage.
See Table 1.
E=
Max. 50mΩ
P × R
3A
100
80
60
40
20
0
−55
E: Rated voltage (V)
P: Rated power (W)
R: Nominal resistance (Ω)
AMBIENT TEMPERATURE (°C)
0
Table 1
Conditions
Resistance tolerance
F (±1%)
J (±5%)
Fig.1
70
100
125
10≤R≤180k
1.0≤R<2.0
2.2≤R<9.1
10≤R≤330k
360k<R≤560k
155
1/3
Resistance range
(Ω)
(E24,96)
(E24)
(E24)
(E24)
(E24)
−55°C to +155°C
Limiting element voltage
0.5W (1 / 2W)
Resistance temperature coefficient
Specifications
at 70°C
(ppm / °C)
500±350
±100
±500
±200
±350
200V
2009.10 - Rev.G

Related parts for MCR50JZHJ000

MCR50JZHJ000 Summary of contents

Page 1

... Ruthenium oxide dielectric offers superior resistance to the elements. 3) Electrodes not corroded by soldering Suitable for re-flow soldering. 4) ROHM resistors have approved ISO9001- / ISO/TS 16949- certification. Design and specifications are subject to change without notice. Carefully check the specification sheet supplied with the product before using or ordering it. ...

Page 2

MCR50 Characteristics Item Resistor type J : ±5% Resistance F : ±1% Variation of resistance with temperature ± (2.0%+0.1Ω) Overload A new uniform coating of minimum of 95% of the surface being immersed Solderability and no soldering damage. ± (1.0%+0.05Ω) ...

Page 3

MCR50 Packaging Reel Label (Unit : mm +1.0 φ180 φ60 φ13 ± 0.2 13 −1 Part No. Explanation M C Part No. Packaging Specifications Code Resistance tolerance Part No. ...

Page 4

No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose ...

Related keywords