RR0816P-164-B-T5 Susumu, RR0816P-164-B-T5 Datasheet - Page 16

• Manufacturer Part Number: RR0816P-164-B-T5
• Description: RES 160K OHM 1/16W .1% 0603 SMD
• Manufacturer: Susumu
• Series: RRr

Specifications of RR0816P-164-B-T5

• Resistance (ohms): 160K
• Power (watts): 0.063W, 1/16W
• Composition: Thin Film
• Temperature Coefficient: ±25ppm/°C
• Tolerance: ±0.1%
• Size / Dimension: 0.063" L x 0.031" W (1.60mm x 0.80mm)
• Height: 0.016" (0.40mm)
• Lead Style: Surface Mount (SMD - SMT)
• Package / Case: 0603 (1608 Metric)
• Resistance In Ohms: 160K
• Case: 0603 (1608 metric)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Other names: RR08P160KBTR

TITLE:
(4) Resistors shall be used within rated range shown in specification.
(5) In case that resistor is loaded a rated voltage, it is necessary to confirms temperature of a resistor and to
(6) Observe Limiting element voltage and maximum overload voltage specified in each specification.
(7) If there is a possibility that a large voltage (pulse voltage, shock voltage) charge to resistor, It is necessary
8.5 Using and Handling
Refer to EIAJ RCR-2121 -- Electronic Industries Association of Japan technological report "Fixed resistor
directions guideline.”
Especially, if voltage more than specified value will be loaded to resistor, there is a case it will make
damage for machine because of temperature rise depending on generation of heat, and increase resistance
value or breaks.
reduce a load power according to load reduction curve, because a temperature rise of a resistor depends
on influence of heat from mounting density and neighboring element.
that operating condition shall be set up before use, because performance of thin film resistor is affected
by a large shock voltage.
Chip resistor RR0816 series
Specification for
SUSUMU
CO.,LTD
SPEC.NO:
RR00-1098
Rev. No.
16/16
0