E3C-LDA9 Omron, E3C-LDA9 Datasheet - Page 3

• Manufacturer Part Number: E3C-LDA9
• Description: AMP EXTRNL-INPT PNP-OUTPT W/CONN
• Manufacturer: Omron
• Series: E3C-LDAr
• Type: Photoelectric Sensorsr

Specifications of E3C-LDA9

• Amplifier Type: External Input
• Voltage - Supply: 12 V ~ 24 V
• Output Type: PNP
• Current - Supply: 45mA
• Mounting Type: DIN Rail
• Features: Control the laser with an Amplifier the same size as a Digital Fiber Amplifier
• Sensing Method: Diffuse Reflective
• Light Source: Red Semiconductor Laser Diode
• Connection: Separate Connector
• Output Configuration: NPN or PNP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: E3CLDA9

Amplifier Units
Note: Communications are disabled if super-high-speed mode is selected, and the mutual interference prevention function and the communica-
E3C-LDA Series
Supply voltage
Power consumption
Con-
trol out-
put
Re-
sponse
time
Func-
tions
Digital display
Display orientation
Ambient temperature range
Ambient humidity range
Insulation resistance
Dielectric strength
Vibration resistance
Shock resistance
Degree of protection
Connection method
Weight (packed state)
Materi-
als
Item
tions function for the Mobile Console will not function.
ON/OFF output
Analog output
Super-high-speed
mode
High-speed mode
Standard mode
High-resolution
mode
Differential detec-
tion
Timer function
Zero-reset
Initial reset
Mutual interference
prevention
Counter
I/O settings
Case
Cover
Model NPN output E3C-LDA21
PNP output E3C-LDA51
Type
12 to 24 VDC 10%, ripple (p-p) 10% max.
1,080 mW max. (current consumption: 45 mA max. at power supply voltage of 24 VDC)
Load power supply voltage: 26.4 VDC max.; NPN/PNP (depends on model) open collector
Load current: 50 mA max.; residual voltage: 1 V max.
---
80 s for operation and re-
set
250 s for operation and reset
1 ms for operation and reset
4 ms for operation and reset
Switchable between single edge and double edge detection mode.
Single edge: Can be set to 250 s, 500 s, 1 ms, 10 ms, or 100 ms.
Double edge: Can be set to 500 s, 1 ms, 2 ms, 20 ms, or 200 ms.
Select from OFF-delay, ON-delay, or one-shot timer.
1 ms to 5 s (1 to 20 ms set in 1-ms increments, 20 to 200 ms set in 10-ms increments, 200 ms to 1 s set in 100-ms increments,
and 1 to 5 s set in 1-s increments)
Negative values can be displayed.
Settings can be returned to defaults as required.
Possible for up to 10 Units. (See note.)
Switchable between up
counter and down counter.
Set count: 0 to 9,999,999
External input setting (Se-
lect from teaching, power
tuning, zero reset, light OFF,
or counter reset.)
Select from digital incident level + threshold or six other patterns.
Switching between normal/reversed display is possible.
Operating: Groups of 1 to 2 Amplifiers: 25 C to 55 C
Storage:
Operating and storage: 35% to 85% (with no condensation)
20 M
1,000 VAC at 50/60 Hz for 1 min.
Destruction: 10 to 150 Hz, 0.7-mm double amplitude for 80 min each in X, Y, and Z directions
Destruction: 500 m/s
IP50 (IEC 60529)
Prewired cable or wire-reducing connector
With prewired cable: Approx. 100 g
With wire-reducing connector: Approx. 55 g
Polybutylene terephthalate (PBT)
Polycarbonate
Photoelectric Sensors with Separate Digital Amplifiers (Laser-type Amplifier Units)
External-input models
at 500 VDC
Groups of 3 to 10 Amplifiers: 25 C to 50 C
Groups of 11 to 16 Amplifiers: 25 C to 45 C
30 C to 70 C (with no icing)
E3C-LDA7
E3C-LDA9
2
, 3 times each in X, Y, Z directions
100 s for operation and reset
---
Output setting (Select from
channel 2 output, area out-
put, or self-diagnosis.)
E3C-LDA11
E3C-LDA41
Twin-output models
E3C-LDA6
E3C-LDA8
Output setting (Select from
channel 2 output, area output,
self-diagnosis, or ATC error
output.)
LDA11AT
LDA41AT
ATC-output models
E3C-
E3C-
E3C-LDA6AT
E3C-LDA8AT
Control output
Voltage output: 1 to 5 VDC (con-
nected load 10 k
Temperature characteristics
0.3% F.S./ C
Response time/Repeat accuracy
Super-high-speed mode: 100 s/
4.0% F.S.
High-speed mode: 250 s/4.0%
F.S.
Standard mode: 1 ms/2.0% F.S.
High-resolution mode: 4 ms/2.0%
F.S.
Analog output setting (Offset volt-
age can be adjusted.)
Analog-output models
E3C-LDA11AN
E3C-LDA41AN
min.)
3