SLEV900/AFB NXP Semiconductors, SLEV900/AFB Datasheet - Page 4

• Manufacturer Part Number: SLEV900/AFB
• Description: KIT EVAL I.CODE RFID 13.56MHZ
• Manufacturer: NXP Semiconductors
• Series: ICODEr
• Type: RFID (Radio Frequency Identification)r

Specifications of SLEV900/AFB

• Contents: Reader, Antenna, Cables, Samples, Software and User Manual
• For Use With/related Products: ICODE Transponders
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• Other names: 568-2231

Philips Semiconductors
5
6
6.1
Getting started with the I-CODE evaluation kit requires the
following steps:
1. Connect the antenna cable to the BNC connector at
2. Connect the serial interface cable to the COM1 or
3. Connect the 24 V power supply cable to the
4. Connect the 24 V power supply to the mains and
The I-CODE reader is now ready for use.
Remark: The I-CODE evaluation kit is delivered with an
RF power output of 4 W. Since the evaluation kit antenna
was designed for that output power level, an RF power
higher than 4 W might damage the evaluation kit antenna
If higher RF power is desired a customized antenna has to
be used (e.g. gate antennas).
The RF power output is adjustable by software (e.g. with
CRMTEST3.EXE).
2002 May 23
handbook, full pagewidth
I-CODE Evaluation kit
the I-CODE reader
COM2 port at your host PC and to the connector at the
I-CODE reader
appropriate connector at the I-CODE reader and to a
24 1 V, 40 W power supply
switch it on.
BLOCK DIAGRAM
FUNCTIONAL DESCRIPTION
Hardware
EXTERNAL
PC
serial
interface
cable
I-CODE READER
EXTERNAL
SLRM900
SUPPLY
POWER
power supply
cable DC
Fig.1 Block diagram.
antenna
cable
4
6.2
6.2.1
Minimum requirements of external PC:
ANTENNA
I-CODE
Pentium 133 MHz; 32 Mb RAM
UART 16 550A (or compatible)
5 Mb free disk space
Floppy disk drive 3.5 inch
Resolution of the video-card and monitor:
– 800
– 1024
Colour depth:
– 16-bit (65536).
Software
S
YSTEM REQUIREMENTS
600 with small fonts or
768 with large fonts.
I-CODE
I-CODE
labels
inlets
Product specification
2 manuals
3 disks
SLEV900
MGW407